Uploaded July 2026 | Updated September 2026, 2 weeks ago
The @bondtechab INDX units, including the @Prusa3D Founders Editions are shipping to consumers, but, unfortunately the start has been far from perfect. From badly printed parts on Prusa's farm to nozzles that were sold as hardened, but nowhere near as hard as they should be, the launch of INDX has been wrought with controversy. So, in Making Awesome Podcast fashion, lets talk about it.
Jacob also has a story to tell.. His home was broken into, his car stolen TWICE, and well, you will have to watch/listen to find out how!
Chapters:
00:00:00 - Intro & Weekly Catch-Up
00:17:25 - Prusa INDX Launch & Firmware Bugs Analyzed
00:46:00 - The Hardened Nozzle Controversy (Rockwell Scale vs. Induction)
01:12:40 - Reading Bondtech's Response & Community Backlash
02:08:30 - Olaf's Q&A: Compensation, Refunds & Rebuilding Trust
02:29:50 - Jacob's Car Stolen (Twice!) & High-Speed Police Chase
02:57:00 - Stolen Pepsi, Chicken, & Sword-Drip Vigilantism
03:16:00 - AA & Copart Insurance Saga, All Clean Pitch & Outro
Want edited versions of these shows? Check out @makingawesome for edited down shows and clips as well!
A HUGE Thank you to the Filament Sponsors of these streams, @printedsolid and @3dprima481!
Check them out:
printedsolid.com
3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026
Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out @construct3d https://b.link/Construct3D
Use the discount code : "makingawesome" for 15% off.
Need HIGH END 3D Scanning ANYWHERE in the world?? Check out @3DMusketeers!! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM
Looking for a stream to watch after we finish our stream, check out @SteveBuilds's latest stream: youtube.com/live/d86jirF3048
__________________________________
Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through 3DMusketeers.com/podcast and someone will get you set up to be a guest!
🎁 Support us directly on Patreon! 🧡💯 patreon.com/3DMusketeers
🎁 YouTube Channel Memberships! 🧡💯 https://b.link/YTmembership
🎁 Join our Discord Via Paypal (or the others)🧡💯 https://b.link/10Paypal
Grab some Merch: shop.3dmusketeers.com
🛒 Shop Amazon with our Affiliate Code: amzn.to/3hrzVcL
🛒 Shop Prusa with our Affiliate Code: https://b.link/3DM_Prusa
Want Great Royalty FREE music? Choose Epidemic Sound: https://b.link/EpidemicSound
____________________________________
Keep up to date by following us here!
Website: 3DMusketeers.com
Twitter: twitter.com/3d_musketeers
Facebook: facebook.com/3DMusketeers
Instagram: instagram.com/3dmusketeers
LinkedIn: linkedin.com/company/3dmusketeers
Email: Youtube@3Dmusketeers.com
#indx #indxfe #indxnozzle #hardenednozzle #heattreating #3dprintfail #printfail
FTC Disclaimer: A percentage of sales is made through Affiliate links
The @bondtechab INDX units, including the @Prusa3D Founders Editions are shipping to consumers, but, unfortunately the start has been far from perfect. From badly printed parts on Prusa's farm to nozzles that were sold as hardened, but nowhere near as hard as they should be, the launch of INDX has been wrought with controversy. So, in Making Awesome Podcast fashion, lets talk about it.
Jacob also has a story to tell.. His home was broken into, his car stolen TWICE, and well, you will have to watch/listen to find out how!
Chapters:
00:00:00 - Intro & Weekly Catch-Up
00:17:25 - Prusa INDX Launch & Firmware Bugs Analyzed
00:46:00 - The Hardened Nozzle Controversy (Rockwell Scale vs. Induction)
01:12:40 - Reading Bondtech's Response & Community Backlash
02:08:30 - Olaf's Q&A: Compensation, Refunds & Rebuilding Trust
02:29:50 - Jacob's Car Stolen (Twice!) & High-Speed Police Chase
02:57:00 - Stolen Pepsi, Chicken, & Sword-Drip Vigilantism
03:16:00 - AA & Copart Insurance Saga, All Clean Pitch & Outro
Want edited versions of these shows? Check out @makingawesome for edited down shows and clips as well!
A HUGE Thank you to the Filament Sponsors of these streams, @printedsolid and @3dprima481!
Check them out:
printedsolid.com
3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026
Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out @construct3d https://b.link/Construct3D
Use the discount code : "makingawesome" for 15% off.
Need HIGH END 3D Scanning ANYWHERE in the world?? Check out @3DMusketeers!! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM
Looking for a stream to watch after we finish our stream, check out @SteveBuilds's latest stream: youtube.com/live/d86jirF3048
__________________________________
Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through 3DMusketeers.com/podcast and someone will get you set up to be a guest!
🎁 Support us directly on Patreon! 🧡💯 patreon.com/3DMusketeers
🎁 YouTube Channel Memberships! 🧡💯 https://b.link/YTmembership
🎁 Join our Discord Via Paypal (or the others)🧡💯 https://b.link/10Paypal
Grab some Merch: shop.3dmusketeers.com
🛒 Shop Amazon with our Affiliate Code: amzn.to/3hrzVcL
🛒 Shop Prusa with our Affiliate Code: https://b.link/3DM_Prusa
Want Great Royalty FREE music? Choose Epidemic Sound: https://b.link/EpidemicSound
____________________________________
Keep up to date by following us here!
Website: 3DMusketeers.com
Twitter: twitter.com/3d_musketeers
Facebook: facebook.com/3DMusketeers
Instagram: instagram.com/3dmusketeers
LinkedIn: linkedin.com/company/3dmusketeers
Email: Youtube@3Dmusketeers.com
#indx #indxfe #indxnozzle #hardenednozzle #heattreating #3dprintfail #printfail
FTC Disclaimer: A percentage of sales is made through Affiliate links
