IMPROVING MY 5 INCH GAUGE "LION" LOCOMOTIVE

Uploaded June 2026 | Updated September 2026, 2 weeks ago

Improving My 5 Inch Gauge "Lion" Locomotive - Part #2. The job begins by removing the Taper Pins from the Crank Webs. This requires patience and a firm yet delicate approach with a small Hammer. Hitting a piece of Brass is a better idea than hitting the Taper Pins Directly. Once the Taper Pins are out the Crank Webs are removed by gently using the Hammer once again to loosen them from the ends of the Axles. patreon.com/keithappleton
IF YOU ENJOY WATCHING THESE DETAILED TUTORIAL VIDEOS THAT I PRODUCE TO HELP BEGINNERS TO THE HOBBY, THEN PLEASE BECOME A PATRON OF MY YOUTUBE CHANNEL VIA "PATREON" AND ALLOW ME THE TIME TO MAKE EVEN MORE OF THESE SPECIALIST AND HIGHLY DETAILED TUTORIAL VIDEOS. AS A PATREON SUPPORTER YOU ARE ABLE TO ACCESS MANY OF MY VIDEOS THAT ARE NOT FOR PUBLIC VIEW ON YOUTUBE.
PLEASE VISIT MY WEBSITE FOR THE VERY EASY TO USE COMPREHENSIVE PLAYLIST INDEX OF ALL OF MY YOUTUBE VIDEOS:
mainsteam.co.uk
OR CLICK HERE FOR PATREON:
patreon.com/keithappleton
Please become a member of my Youtube Channel to get access to extra videos:
youtube.com/channel/UCgeQiJg-PIH5MZQn0aRd1mg/join

HOW TO BUILD A STUART MODELS DYNAMO - PART #4

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #27

A STUART 10H STEAM ENGINE BUILD - PART #8

AN OLD STEAM SHIP IN POOR MECHANICAL CONDITION - PART #1

A SPECIAL STUART VICTORIA STEAM ENGINE - PART #1

MACHINING SMALL METAL PARTS IS NOT EASY FOR BEGINNERS

WORKING ON A SIMPLEX STEAM LOCOMOTIVE - PART #34

AN OLD STEAM POND LAUNCH IN POOR CONDITION - PART #15

AN OLD MODEL STEAM SHIP IN GOOD CONDITION - PART #12

REBUILDING A STUART MAJOR BEAM ENGINE - PART #6

STUART VICTORIA PIPING ARRANGEMENT - PART #19