Nerdforge | I'm Building A LASER GUN Prop (and now the electronics works!) @Nerdforge | Uploaded October 2019 | Updated October 2024, 12 hours ago.
I'm making a huge LASER GUN prop BLASTER!
Patreon: patreon.com/nerdforge

PART 1: youtube.com/watch?v=-jJUmsq0QXY

MECHA BONNIE MERCH: http://nerdforge.store

3D MODELS: thingiverse.com/Nerdforge/collections/laser-gun-parts
SCHEMATIC: imgur.com/a/jrxbFkz
ARDUINO CODE: github.com/hansjny/Natural-Nerd/blob/master/arduino/led_gun.ino


All links below marked with * at the front are affiliation links that helps us out and supports the channel. Thanks!

MATERIALS:
- Plywood sheet
- 50mm acrylic tube (simplyplastics.com/catalog/acrylic-tube/c-24/c-81)
- 150w boost converter: * bit.ly/150wboost
- Switch: * bit.ly/heavy-switch
- 2pcs 60mm 12V fans: * bit.ly/12v-fan
- 100w LED, cold white: * bit.ly/100w-white & green: * bit.ly/100w-green
- Heat sink: * bit.ly/heat-sink or bit.ly/heat-sinkk
- Springs
- 4mm & 8mm metal rods
- 3D printed LED socket
- 12V power supply
- 2pcs 7V batteries + sockets (NP-F960/F970): * bit.ly/NP-F960 or ebay.com/itm/NP-F950-NP-F770-NP-F960-NP-F970-Battery-or-Charger-for-Sony-NP-F330-NP-F550-TP/332670744990
- Arduino Nano: * bit.ly/a-nano
- Buck converter: * bit.ly/buck-converter
- Relays: * bit.ly/re-lay
- Trigger button / momentary push button: * bit.ly/tinyswitch
- RGB LED-strip: * bit.ly/5v-rgb or bit.ly/side-emitting-LED
- Flat wires: * bit.ly/flatwires
- EVA-foam
- Monocular: bit.ly/mono-cular

TOOLS:
- Our 3D PRINTER: * bit.ly/Creality-CR10
- Voltmeter
- Ammeter: * bit.ly/am-meter
- Soldering iron + soldering supplies: * bit.ly/solder-station
- Heat shrink: * bit.ly/heat-shrink
- Wires
- Jigsaw and other saws
- Drill
- Epoxy glue and wood glue

FOLLOW:
Instagram - instagram.com/thenerdforge
Discord - discord.io/nerdforge
Facebook - facebook.com/Nerdforge
Twitter - twitter.com/TheNerdforge
Website - thenerdforge.com
BUSINESS CONTACT: contact@thenerdforge.com