Uploaded April 2024 | Updated November 2026, 3 hours ago
Parking brake cable clip geni.us/OCkz3
Cheaper alternative clip amzn.to/4pusfWg (I haven't tried this one, but looks like it would work just as well)
Milwaukee ratchet amzn.to/3vFRz5M
Silicone spray amzn.to/4aG2NGu
13mm ratcheting wrench amzn.to/3xqYrVm
T45 Torx bit amzn.to/4cHGXEh
Metric sockets amzn.to/43Lr4sg
Tube light amzn.to/3QdqsGz
Written step-by-step instructions justinbuice.com/blog/bmw-grinding-sound
If your BMW is making a grinding noise when you accelerate, the culprit is likely the parking brake cable retainer clip. The stock BMW clip is made out of plastic and becomes brittle with age. Over time, the pieces that hold the cables in place will snap off, allowing the cables to hang down and touch the driveshaft. At first, you will only hear it under hard acceleration, but eventually you’ll hear a constant grinding sound as the cables droop down.
Thankfully, a company called AGA tools developed an all aluminum replacement which should last the life of the car. In this video, I’ll show you step by step how to install it! The install is do-able, but requires crawling under your car and working in a frustratingly tight space. If you can do it yourself though, you’ll save a ton of money. On the forums, I’ve read posts of people being quoted as much as $1,300 for this job.
Camera geni.us/L80c2
Lens geni.us/c4c0ot
Mic geni.us/O6cBlG
Intro 00:00
The problem 00:14
The part 01:15
Tools required 01:53
DIY 02:07
Notes 06:30
justinbuice.com
INSTAGRAM @justinbuice
#BMW #F30 #340i
This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. Win!
Parking brake cable clip geni.us/OCkz3
Cheaper alternative clip amzn.to/4pusfWg (I haven't tried this one, but looks like it would work just as well)
Milwaukee ratchet amzn.to/3vFRz5M
Silicone spray amzn.to/4aG2NGu
13mm ratcheting wrench amzn.to/3xqYrVm
T45 Torx bit amzn.to/4cHGXEh
Metric sockets amzn.to/43Lr4sg
Tube light amzn.to/3QdqsGz
Written step-by-step instructions justinbuice.com/blog/bmw-grinding-sound
If your BMW is making a grinding noise when you accelerate, the culprit is likely the parking brake cable retainer clip. The stock BMW clip is made out of plastic and becomes brittle with age. Over time, the pieces that hold the cables in place will snap off, allowing the cables to hang down and touch the driveshaft. At first, you will only hear it under hard acceleration, but eventually you’ll hear a constant grinding sound as the cables droop down.
Thankfully, a company called AGA tools developed an all aluminum replacement which should last the life of the car. In this video, I’ll show you step by step how to install it! The install is do-able, but requires crawling under your car and working in a frustratingly tight space. If you can do it yourself though, you’ll save a ton of money. On the forums, I’ve read posts of people being quoted as much as $1,300 for this job.
Camera geni.us/L80c2
Lens geni.us/c4c0ot
Mic geni.us/O6cBlG
Intro 00:00
The problem 00:14
The part 01:15
Tools required 01:53
DIY 02:07
Notes 06:30
justinbuice.com
INSTAGRAM @justinbuice
#BMW #F30 #340i
This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. Win!










