Identifying the 3 Chainsaw Carburetor Adjuster Screws @TheRepairSpecialist
Identifying the 3 Chainsaw Carburetor Adjuster Screws  @TheRepairSpecialist
Uploaded April 2024 | Updated November 2026, 4 days ago
The 'T' Screw

Identifying the three carburetor adjustment screws on your chainsaw is crucial for maintaining optimal performance. The T screw, also known as the idle speed screw, is typically located on the side of the chainsaw's carburetor body. It regulates the engine's idle speed when the throttle trigger is not pressed. Adjusting the T screw ensures that the engine idles smoothly without stalling or running too fast. It's usually distinguished by its distinct shape or color, often marked with "T" or an arrow indicating its function

The 'H' Screw

At high engine speeds, the air-fuel mixture is regulated by the H screw, also known as the High-speed screw. When cutting through thick logs or branches or performing other heavy-duty activities, the chainsaw's performance is adjusted by this screw. The H screw, which is usually found close to the carburetor's air filter side, modifies the fuel flow when the throttle trigger is fully engaged. By fine-tuning this screw, you may avoid problems like overheating or engine damage from a lean fuel mixture, as well as ensure optimal engine power output. It is frequently recognised by marks like "H" or a sign that indicates its purpose.

The 'L' Screw

Last but not least, at low engine speeds, the L screw—short for Low-speed screw—manages the air-fuel mixture. The L screw, which is located next to the carburetor's fuel pump side, controls the mixture when the chainsaw is at idle or at low throttle. This screw can be adjusted to ensure smooth engine starting and low-speed operation. Appropriate adjustment avoids issues like as rough idling, poor acceleration, and stalling. It is usually indicated with a "L" or a symbol that represents its purpose. Maintaining optimal performance and extending the life of your chainsaw require that you recognise and accurately adjust these three carburetor screws.

Have a great day

Craig (Owner and Creator of The Repair Specialist Channel)
Identifying the 3 Chainsaw Carburetor Adjuster ScrewsTheoretical Explanation of the Chainsaws LOW (L) ScrewT Screw on your Chainsaw. What is it??STALE FUEL: Does it cause Engine Flooding, (by Craig Kirkman)PRIMER BULB Not Filling -  This is one Main ReasonAre Factory Carburetor Settings Actually Correct?Piston Wear on Husqvarna ChainsawChainsaw BOG due to LOW Jet SettingsCan I Mulch Wet Grass?Chainsaw won’t Idle with FIXNever Buy The Wrong Chainsaw Chain Again....This Ignition Coil worked brilliantly for Years - BUT THEN.......
TheRepairSpecialist |

Identifying the 3 Chainsaw Carburetor Adjuster Screws

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER