IC7300MK2 Digital Settings and Presets @ND3N
IC7300MK2 Digital Settings and Presets  @ND3N
Uploaded February 2026 | Updated November 2026, 21 hours ago
This video takes a look at setting up the new ICOM IC-7300MK2 for digital modes. By the way, much of this video applies to the original IC-7300.
We'll go through all of the rig settings and functions necessary for use with digital modes. We'll also take a look at the preset Settings. Since this is a new rig on the market, none of the use your software packages include the mark 2, so I'll be showing you the work around to get your mark 2 working with digital software.

List of Settings:
Display Screen:
Mode = USB-D
Filter = FIL1
Bandwidth = 3.0 K

Main Settings:
SET/Function/Tuner:
a. [TUNER] Switch = Auto
b. PTT Start = ON
SET/CONNECTORS/USB AF/IF Output:
c. Output Select = AF
d. AF Output Level = 25-ish (Audio input – Speaker)
SET/CONNECTORS/MOD Input
e. USB MOD Level = 50 (Drive Level - Mic)
f. DATA MOD = USB
SET/CONNECTORS/CI-V
g. CI-V Baud Rate = (Your Choice) 19200
h. CI-V Address = 94h
SET/CONNECTORS/USB (B) Function = CI-V
Functions:
P.AMP/ATT = P.AMP1
AGC = FAST (Medium will work as well – experiment for your system)
NOTCH/NB/NR = OFF
IP+ = ON
VOX = OFF
1/ 4 = User Choice
MONI = ON
Preset 2 (Default Name “FT8” – My Name “Digi B6
** Note anything not used will be unchecked and not discussed in this list…
Preset Name: Name whatever you want
Mode: USB-D
Filter: FIL1
Filter BW: 3.0k
Filter Type (HF): Soft
USB Output Select: AF (Audio Freq)
USB AF Output Level = 25%-ish
USB MOD Level = 50% - ish
DATA MOD = USB
SSB-D TX Bandwidth = 300-2700
CI-V Baud Rate = Your choice, I prefer 19200 and avoid using Auto
CI-V Address = B6h
** Make sure you “Write” after changes

Preset 1 (Default Name “Normal” – My Name “Digi 94”
Same as above, except change Preset Name to Digi 94 (or whatever you want to call it. “Fred” and “Barney” work just as well as anything else…)
Also, change CI-V Address to 94h

Chapters:
01:24 Main Display
02:30 Main Settings
05:55 Functions
06:31 Multi-Knob Selections
07:28 Presets
13:57 Proof of Concept


Thanks for watching. Please remember to comment, like, and share this video. Also, please consider subscribing to this channel. I certainly appreciate it. Future videos will do a deeper dive into these digital modes .

73 de Tom, ND3N
IC7300MK2 Digital Settings and PresetsHam Radio: After Action Report of FT Roundup Contest, FT-991A, and moreAll you ever wanted to know about FT-991A CW - but were afraid to askBest settings for SSB Modes on the Yaesu FT-991AEmail without Internet - do it with WinLink/VARA HFNAQP Updates and Operating OverviewGetting Started with Log4OM from an Old Man...The Truth About PEP, EIRP, and ERP RevealedIC 7760 Receive settings for improving your ears...5 Study Tips for your Ham Radio TestAm I still concerned about HamVention 2022?Essential Easy First Steps for Yaesu FT-dx10...
ND3N Ham Shack Chat |

IC7300MK2 Digital Settings and Presets

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER