Uploaded September 2026 | Updated November 2026, 6 hours ago
Get Some KickAss 3D printable Guitars - bubblebellybonsai.com
Some of the best 3D prints online! - thangs.com/designer/The%20Kit%20Kiln
The WonderMaker ZR Ultra is a four-toolhead FDM 3D printer with a 300 x 240 x 290mm build volume, designed to deliver proper multicolour and multi-material printing without the enormous purge waste of a single-nozzle colour system. On paper, it's an interesting budget route into toolchanging. But after a difficult Kickstarter launch and a rather unusual availability situation, I wanted to find out what the machine itself was actually like.
In this review, I get the ZR Ultra set up, test all four toolheads, check first-layer performance and put it through some proper multicolour projects, including baby dragons, a printable guitar and larger display pieces. I also look at the physical design, manual filament loading, toolhead assembly, nozzle maintenance and how the machine compares with the more polished toolchangers now available.
There's also the software side to consider. The ZR Ultra runs Klipper, supports standard OrcaSlicer and doesn't require cloud access, which makes it an interesting platform for people who like to tinker, tune and actually have control over their machines. But a printer is more than its hardware, so I also look at the launch, availability, support and what the newer ZR Ultra S means for the original machine.
The question isn't simply whether this thing can print. It's whether the whole package makes sense in today's toolchanger market.
#WonderMaker #ZRUltra #3DPrinting #Toolchanger #FDMPrinting #FauxHammer
---
**Top Tools & Resources**
3D Printer Reviews: fauxhammer.com/es/tag/3d-printer-review
**Community**
FauxHammer: fauxhammer.com
YouTube: youtube.com/fauxhammer
Facebook: facebook.com/pg/FauxHammerBlog
Instagram: instagram.com/fauxhammerblog
Get Some KickAss 3D printable Guitars - bubblebellybonsai.com
Some of the best 3D prints online! - thangs.com/designer/The%20Kit%20Kiln
The WonderMaker ZR Ultra is a four-toolhead FDM 3D printer with a 300 x 240 x 290mm build volume, designed to deliver proper multicolour and multi-material printing without the enormous purge waste of a single-nozzle colour system. On paper, it's an interesting budget route into toolchanging. But after a difficult Kickstarter launch and a rather unusual availability situation, I wanted to find out what the machine itself was actually like.
In this review, I get the ZR Ultra set up, test all four toolheads, check first-layer performance and put it through some proper multicolour projects, including baby dragons, a printable guitar and larger display pieces. I also look at the physical design, manual filament loading, toolhead assembly, nozzle maintenance and how the machine compares with the more polished toolchangers now available.
There's also the software side to consider. The ZR Ultra runs Klipper, supports standard OrcaSlicer and doesn't require cloud access, which makes it an interesting platform for people who like to tinker, tune and actually have control over their machines. But a printer is more than its hardware, so I also look at the launch, availability, support and what the newer ZR Ultra S means for the original machine.
The question isn't simply whether this thing can print. It's whether the whole package makes sense in today's toolchanger market.
#WonderMaker #ZRUltra #3DPrinting #Toolchanger #FDMPrinting #FauxHammer
---
**Top Tools & Resources**
3D Printer Reviews: fauxhammer.com/es/tag/3d-printer-review
**Community**
FauxHammer: fauxhammer.com
YouTube: youtube.com/fauxhammer
Facebook: facebook.com/pg/FauxHammerBlog
Instagram: instagram.com/fauxhammerblog










