Uploaded August 2026 | Updated November 2026, 3 hours ago
FlexiSpot Anniversary Day & Labor Day Sales are coming now! If you're building or upgrading your home office like me, use my code "YTE7P50" to get EXTRA $50 off on the standing desk.
FlexiSpot E7 Plus standing desk: go.flexispot.com/SkillTree-E7Plus
Anniversary day sales:go.flexispot.com/SkillTree-LP
Bone and antler are two of the oldest materials we've ever made things out of, and they're sitting in your kitchen and your pet store. In this one we make our own buttons, toggles and a cloak clasp out of soup bones and a chewed-up antler using nothing but hand tools.
Along the way we work out what this stuff is actually like to work with: bone cuts easily and polishes up like plastic, but it's brittle and will snap on you. Antler flexes and carves even easier, but that fibrous core will never take a shine. Knowing which one to reach for is the real skill here.
SOURCING AND PREPPING BONE
Soup bones from the butcher work great, and yes, eat the marrow first. To clean them: simmer gently to get everything off, then let them sit in warm soapy water for a week or so to pull the grease out. Skip that step and your bone stays yellow and goes gross on you over time.
DO NOT USE BLEACH. It's the most common advice online and it's wrong bleach destroys the collagen and the bone will keep degrading long after you've finished the project. If you want it whiter, use 3% hydrogen peroxide after it's fully degreased, and dry it slowly.
Antler dog chews are the shortcut: already cleaned, already round, cheap, no bucket required.
⚠️ WEAR A MASK. Bone dust is bad news. It's less awful with hand tools than with rotary tools, but wear a respirator regardless.
CHAPTERS
0:00 – Living like a ranger
0:47 – Where to get bone and antler
1:16 – Cleaning and prepping bone
1:55 – Making a bone button
2:20 – A word about bone dust
7:30 – What bone is actually like to work with
7:51 – Antler: the dog chew upgrade
8:14 – A drawstring bead closure
9:17 – Making a toggle
10:19 – Bone vs antler
11:01 – The penannular clasp
13:14 – Carving the antler pin
14:17 – Finished, on the cloak
14:51 – Was any of this necessary?
---------------------------------------------------------------
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: discord.gg/m5HFsVj5ZD
---------------------------------------------------------------
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: burgschneider.com/skilltree
--------------------------------------------------------------
🌳 Support and Contact!
🔸Website - https://www.skilltree.how/
🔸Patreon - patreon.com/Skilltree
🔸Discord - discord.gg/skilltree
🔸Amazon Store Page - amazon.com/shop/skilltree
---------------------------------------------------------------
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
--------------------------------------------------------------
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements.
FlexiSpot Anniversary Day & Labor Day Sales are coming now! If you're building or upgrading your home office like me, use my code "YTE7P50" to get EXTRA $50 off on the standing desk.
FlexiSpot E7 Plus standing desk: go.flexispot.com/SkillTree-E7Plus
Anniversary day sales:go.flexispot.com/SkillTree-LP
Bone and antler are two of the oldest materials we've ever made things out of, and they're sitting in your kitchen and your pet store. In this one we make our own buttons, toggles and a cloak clasp out of soup bones and a chewed-up antler using nothing but hand tools.
Along the way we work out what this stuff is actually like to work with: bone cuts easily and polishes up like plastic, but it's brittle and will snap on you. Antler flexes and carves even easier, but that fibrous core will never take a shine. Knowing which one to reach for is the real skill here.
SOURCING AND PREPPING BONE
Soup bones from the butcher work great, and yes, eat the marrow first. To clean them: simmer gently to get everything off, then let them sit in warm soapy water for a week or so to pull the grease out. Skip that step and your bone stays yellow and goes gross on you over time.
DO NOT USE BLEACH. It's the most common advice online and it's wrong bleach destroys the collagen and the bone will keep degrading long after you've finished the project. If you want it whiter, use 3% hydrogen peroxide after it's fully degreased, and dry it slowly.
Antler dog chews are the shortcut: already cleaned, already round, cheap, no bucket required.
⚠️ WEAR A MASK. Bone dust is bad news. It's less awful with hand tools than with rotary tools, but wear a respirator regardless.
CHAPTERS
0:00 – Living like a ranger
0:47 – Where to get bone and antler
1:16 – Cleaning and prepping bone
1:55 – Making a bone button
2:20 – A word about bone dust
7:30 – What bone is actually like to work with
7:51 – Antler: the dog chew upgrade
8:14 – A drawstring bead closure
9:17 – Making a toggle
10:19 – Bone vs antler
11:01 – The penannular clasp
13:14 – Carving the antler pin
14:17 – Finished, on the cloak
14:51 – Was any of this necessary?
---------------------------------------------------------------
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: discord.gg/m5HFsVj5ZD
---------------------------------------------------------------
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: burgschneider.com/skilltree
--------------------------------------------------------------
🌳 Support and Contact!
🔸Website - https://www.skilltree.how/
🔸Patreon - patreon.com/Skilltree
🔸Discord - discord.gg/skilltree
🔸Amazon Store Page - amazon.com/shop/skilltree
---------------------------------------------------------------
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
--------------------------------------------------------------
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements.








![How to Make a Belt Buckle From Scraps (No Forge)
Use code SKILLTREEFB50 to get 50% OFF your first Factor box plus free breakfast for 1 year at https://bit.ly/3T0D1sV!
Turns out you dont need a forge or a single fancy tool to make a working belt buckle. Just a torch, a couple of common nails, and a scrap of steel bar you probably already have lying around. I needed an oddly-sized buckle, couldnt find one anywhere, so I made my own in about an hour. Heres exactly how. Lets level up.
Made a belt but need a buckle to match? This is the other half of the set:
https://youtu.be/LOw_SCqtjnI
WHAT YOULL LEARN:
- Bending steel cleanly with just a torch (no forge)
- Annealing — why heating the metal makes it easy to shape
- Turning a nail into a riveted center bar
- Peening metal so it locks in permanently
- Shaping & filing a buckle to a clean finish
- Making a working prong from a second nail
CHAPTERS
0:00 Why I made my own buckle
0:32 The 3 parts of a buckle
0:52 Making the frame (heat + bend)
4:33 A word from todays sponsor
5:41 Making the center bar
7:51 Making the prong
8:34 Final details — does it actually work?
9:09 Metal safety (read this before you wear one)
9:36 Your next build
QUICK SAFETY NOTE
Know what metal youre using before it sits against your skin all day — go stainless, or seal/treat the steel so it cant rust onto you (or your pants). More on this at 9:09.
MATERIALS & TOOLS
[Add your links so folks can find them:]
- ~6 of 1/8 steel bar (or a big common nail)
- 2 common nails (center bar + prong)
- Propane/butane torch
- Pliers, vise, ball-peen hammer
- Dremel / rotary tool
- Bench grinder or files + sandpaper
- Drill + bits
YOUR TURN
Whats something youve always just *bought* that you reckon you could make from stuff lying around the shop? Drop it in the comments, might tackle it in a future build.
SUPPORT THE CHANNEL
- YouTube Memberships are now live ! [JOIN button up top]
- Website - https://www.skilltree.how/
- Patreon - https://www.patreon.com/Skilltree
- Discord - https://discord.gg/skilltree
- Amazon Store Page - https://www.amazon.com/shop/skilltree
New here? Skill Tree turns scary-looking crafts into your next unlocked skill — leather, metal, wood, and whatever else I talk myself into. Subscribe and pick your class.
#buckle #metalworking #DIY #blacksmithing #howtomake #skilltree
🛒 Materials & Tools Used:
◼️Category
🔸Product
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: https://discord.gg/m5HFsVj5ZD
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: https://burgschneider.com/skilltree
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements. How to Make a Belt Buckle From Scraps (No Forge)](https://i.ytimg.com/vi/zxMSrxCalvk/mqdefault.jpg)