Uploaded March 2026 | Updated September 2026, 2 weeks ago
Even though there is only a small amount of changes in this Auper D6 tuning update, I feel that the car has reached V3 level in my tuning book. The rear end has been working quite well so I will wait to change things for a bit. The front end got some refinement as I have eliminated some bump steer and increased the overall angle slightly but modifying the front knuckle's ballcups. I am trying to find a substitute screw for the front knuckle area where the ball cup touches to have better flexibility for tuning (shown in video). After this video was filmed I have started to try a number of front springs for the mono shock and play around with the stabilizer preload settings. The Auper D6 continues to get better and better the more I drive it and play with the front mono shock settings. The next tune will involve more part and electronics changes so stay tuned for that. Shoutout to Stevey Boi Floyd of Team Strickly Sidewayz for giving the Auper D6 the full sendo :D Thank you for watching, Enjoy the video!
Equipment Installed:
Yokomo BL-PRO 4 Drift Spec ESC (Boost Enabled)
Acuvance Luxon 9.5T Black Brushless Sensored Motor
OMG Predator NBS-LP-16BF Bad Shoppe Edition Red Brushless USB Programmable Servo
Yokomo Drift Performance V4 Gyro Purple DPP-302V4P
Futaba R334SBS-E S.BUS Telemetry 2.4Ghz Receiver
Futaba 10PX 10-Channel 2.4Ghz Radio System
Gens Ace Redline 2.0 4200Mah 140C 2S LiPo Battery
Yokomo P-Tile Tires Mounted On LAB Meister L1 8mm Wheels
3Racing.shop
Auper D6 Limited Edition
https://3racing.shop/products/kit-auperd6-3racing-1-10-drift-car-auperd6
Use code "badshoppe" for 5% Sakura D6 Kits and Parts!
#rc #rcdrifting #drifting
Even though there is only a small amount of changes in this Auper D6 tuning update, I feel that the car has reached V3 level in my tuning book. The rear end has been working quite well so I will wait to change things for a bit. The front end got some refinement as I have eliminated some bump steer and increased the overall angle slightly but modifying the front knuckle's ballcups. I am trying to find a substitute screw for the front knuckle area where the ball cup touches to have better flexibility for tuning (shown in video). After this video was filmed I have started to try a number of front springs for the mono shock and play around with the stabilizer preload settings. The Auper D6 continues to get better and better the more I drive it and play with the front mono shock settings. The next tune will involve more part and electronics changes so stay tuned for that. Shoutout to Stevey Boi Floyd of Team Strickly Sidewayz for giving the Auper D6 the full sendo :D Thank you for watching, Enjoy the video!
Equipment Installed:
Yokomo BL-PRO 4 Drift Spec ESC (Boost Enabled)
Acuvance Luxon 9.5T Black Brushless Sensored Motor
OMG Predator NBS-LP-16BF Bad Shoppe Edition Red Brushless USB Programmable Servo
Yokomo Drift Performance V4 Gyro Purple DPP-302V4P
Futaba R334SBS-E S.BUS Telemetry 2.4Ghz Receiver
Futaba 10PX 10-Channel 2.4Ghz Radio System
Gens Ace Redline 2.0 4200Mah 140C 2S LiPo Battery
Yokomo P-Tile Tires Mounted On LAB Meister L1 8mm Wheels
3Racing.shop
Auper D6 Limited Edition
https://3racing.shop/products/kit-auperd6-3racing-1-10-drift-car-auperd6
Use code "badshoppe" for 5% Sakura D6 Kits and Parts!
#rc #rcdrifting #drifting
