Uploaded November 2026 | Updated November 2026, 3 hours ago
I bought the DJI Avata 360 drone so I can compare performance against the Antigravity A1. What I didn't expect was to have huge problems straight out of the box with the Avata 360.
After several tests and a lengthy conversation with DJI the drone went back to them. It was returned a week later but had they found and cured the problem?
watch the video to see what process we went through to try and get the Avata 360 to fly properly with the Goggles N3 and the Motion Controller 3. Does it all work correctly now?
We put the DJI Avata 360 to the test to see if a persistent skipping problem can actually be resolved. After returning the unit for repair, we investigate if the footage is finally stable enough for professional use.
This session documents our hands-on experience using the Goggles N3 and Motion Controller 3 to evaluate the drone performance after its return from the manufacturer. By comparing the output against the Antigravity A1, we provide a clear look at whether the hardware issues were successfully addressed or if the skipping remains a barrier for aerial cinematography.
Understanding how these systems handle flight data is essential for anyone relying on consistent video quality in the field. We walk through the specific flight tests conducted to verify if the camera stability holds up during standard maneuvers and high-speed turns.
Subscribe for weekly drone tutorials, and comment below if you want to see more hardware performance tests on this channel.
00:00 Intro
00:32 First Flight
01:20 Problem Solving
02:47 Drone Returned to me
03:50 Second Flight
05:55 Video Test
06:44 Conclusion
#dji #avata #avata360 #djiavata360 #djiavata3 #360 #360video #motioncontroller #goggles #gogglesn3 #n3 #review
I bought the DJI Avata 360 drone so I can compare performance against the Antigravity A1. What I didn't expect was to have huge problems straight out of the box with the Avata 360.
After several tests and a lengthy conversation with DJI the drone went back to them. It was returned a week later but had they found and cured the problem?
watch the video to see what process we went through to try and get the Avata 360 to fly properly with the Goggles N3 and the Motion Controller 3. Does it all work correctly now?
We put the DJI Avata 360 to the test to see if a persistent skipping problem can actually be resolved. After returning the unit for repair, we investigate if the footage is finally stable enough for professional use.
This session documents our hands-on experience using the Goggles N3 and Motion Controller 3 to evaluate the drone performance after its return from the manufacturer. By comparing the output against the Antigravity A1, we provide a clear look at whether the hardware issues were successfully addressed or if the skipping remains a barrier for aerial cinematography.
Understanding how these systems handle flight data is essential for anyone relying on consistent video quality in the field. We walk through the specific flight tests conducted to verify if the camera stability holds up during standard maneuvers and high-speed turns.
Subscribe for weekly drone tutorials, and comment below if you want to see more hardware performance tests on this channel.
00:00 Intro
00:32 First Flight
01:20 Problem Solving
02:47 Drone Returned to me
03:50 Second Flight
05:55 Video Test
06:44 Conclusion
#dji #avata #avata360 #djiavata360 #djiavata3 #360 #360video #motioncontroller #goggles #gogglesn3 #n3 #review









![Layer Marney Tower Revealed in this DRONE video. Britains Greatest Tudor Secret
Is this the best preserved Tudor Gatehouse in the country. Rivalled only by Hampton Court Palace.
Layer Marney Tower is an incomplete early Tudor country house, with gardens and parkland, dating from about 1523, in Layer Marney, Essex, England, between Colchester and Maldon. The building was designated Grade I listed in 1952.
The large gatehouse tower is much the most striking element to be completed and to survive.
Constructed in the first half of the reign of Henry VIII, Layer Marney Tower is in many ways the apotheosis of the Tudor gatehouse, and is the tallest example in Britain. It is contemporaneous with East Barsham Manor in Norfolk and Sutton Place, Surrey, with which latter building it shares the rare combination of brick and terracotta construction.[1] The building is principally the creation of Henry 1st Lord Marney, who died in 1523, and his son John, who continued the building work but died just two years later, leaving no male heirs to continue the family line or the construction. What was completed was the main range measuring some 300 feet (91 m) long, the principal gatehouse that is about 80 feet (24 m) tall, an array of outbuildings, and a new church.
Get vidIQ to grow your channel faster! 🚀
https://vidiq.com/Drone-On
#drone #aerialvideo #aerialvideography #travel #4k #fpv #insta360 #360video #antigravitya1 #cinematic #essex #weddings #weddingvenue #layermarney #tudor #tower #towers #gatehouse #henryviii #360drone #history #historical #heritage
Boost your YouTube audience with vidIQ. Use this link to unlock 500 bonus credits when you upgrade to a premium plan: https://vidiq.com/r/?code=wAAfei Layer Marney Tower Revealed in this DRONE video. Britains Greatest Tudor Secret](https://i.ytimg.com/vi/Y8VzqTrLM3w/mqdefault.jpg)
