Uploaded August 2023 | Updated September 2026, 3 weeks ago
You can buy the kit here for $6.59US: amzn.to/47UaTuA
My good friend, Uncle Rob, sent me this kit last year. I am finally getting around to building it. It's a neat idea. A fake candle that you light with a real flame, and extinguish with your breath when you are done. The circuit runs off a 4013 flip/flop with two triggers. Trigger 1 is an infrared receiver, trigger 2 is a microphone. When a flame is brought near trigger 1, it sets the flip/flop. When you blow into the microphone it resets the flip/flip. The candle is represented by an integral RGB LED.
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????
You can buy the kit here for $6.59US: amzn.to/47UaTuA
My good friend, Uncle Rob, sent me this kit last year. I am finally getting around to building it. It's a neat idea. A fake candle that you light with a real flame, and extinguish with your breath when you are done. The circuit runs off a 4013 flip/flop with two triggers. Trigger 1 is an infrared receiver, trigger 2 is a microphone. When a flame is brought near trigger 1, it sets the flip/flop. When you blow into the microphone it resets the flip/flip. The candle is represented by an integral RGB LED.
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????
