Uploaded February 2022 | Updated September 2026, 10 minutes ago

---

I Make an Industrial Style Wall Coat Hook using Large Nails and Rebar, a Wall Mount Coat hanger with three hooks, using old nails and the steel rebar rod, which gives it the real industrial decor look I like. It was a good welding project for me. I enjoyed it.

The big steel flat bar is 3mm thick and 42mm wide. The small steel flat bar is 6mm thick and 32mm wide.
The Rebar is a 7mm rebar.

The main tools used were welding, Magnets V-Pads, an MIG Welder, an Angle Grinder, Alpha Steel Files, and a Drill.
Always use the correct safety gear and learn to use your tools safely; I am not the best role model for this.

The Brand of the Drill bits and cutting/flap discs is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: https://alphatools.com.au

►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark

Always use all the correct safety gear, and use your tools safely. I am not a good role model for this.

Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY