Uploaded November 2026 | Updated November 2026, 2 days ago
Thank you Titan Mattress for sponsoring! Visit titanmattress.com/skilltree to get 30% off your order with code skilltree
Leather stamps can get expensive, so I tried making my own out of Lego, lace, charms and whatever else I could dig out of my junk drawer. I fully expected a pile of hilarious failures. That is not what happened. Turns out almost anything can be a leather stamp if you squish it hard enough, and the lace one honestly blew my mind.
You don’t need a fancy press for any of this either. I show you how to do it with a couple boards and a clamp, too.
So now I’m curious: what would YOU try turning into a stamp? Let me know in the comments. I might need a part two.
⏱️ Chapters
0:00 Can junk make leather stamps?
0:14 How this obsession started
0:50 What I’m testing
1:45 No press? Use boards and a clamp
2:36 The two rules for a good stamp
2:58 Titan Mattress
5:06 Round 1: Metal bits
7:31 Round 2: Lego
12:47 Round 3: Lace (the worst case scenario)
14:38 Turning lace into a real stamp
15:40 Building the elevator shaft
17:25 Final thoughts
The press I used: https://s.vevor.com/QT1LJV
Use code VEVT5 for 5% off!
---------------------------------------------------------------
🛒 Materials & Tools Used:
◼️Category
🔸Product
---------------------------------------------------------------
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: discord.gg/m5HFsVj5ZD
---------------------------------------------------------------
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: burgschneider.com/skilltree
--------------------------------------------------------------
🌳 Support and Contact!
🔸Website - https://www.skilltree.how/
🔸Patreon - patreon.com/Skilltree
🔸Discord - discord.gg/skilltree
🔸Amazon Store Page - amazon.com/shop/skilltree
---------------------------------------------------------------
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
--------------------------------------------------------------
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements.
Thank you Titan Mattress for sponsoring! Visit titanmattress.com/skilltree to get 30% off your order with code skilltree
Leather stamps can get expensive, so I tried making my own out of Lego, lace, charms and whatever else I could dig out of my junk drawer. I fully expected a pile of hilarious failures. That is not what happened. Turns out almost anything can be a leather stamp if you squish it hard enough, and the lace one honestly blew my mind.
You don’t need a fancy press for any of this either. I show you how to do it with a couple boards and a clamp, too.
So now I’m curious: what would YOU try turning into a stamp? Let me know in the comments. I might need a part two.
⏱️ Chapters
0:00 Can junk make leather stamps?
0:14 How this obsession started
0:50 What I’m testing
1:45 No press? Use boards and a clamp
2:36 The two rules for a good stamp
2:58 Titan Mattress
5:06 Round 1: Metal bits
7:31 Round 2: Lego
12:47 Round 3: Lace (the worst case scenario)
14:38 Turning lace into a real stamp
15:40 Building the elevator shaft
17:25 Final thoughts
The press I used: https://s.vevor.com/QT1LJV
Use code VEVT5 for 5% off!
---------------------------------------------------------------
🛒 Materials & Tools Used:
◼️Category
🔸Product
---------------------------------------------------------------
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: discord.gg/m5HFsVj5ZD
---------------------------------------------------------------
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: burgschneider.com/skilltree
--------------------------------------------------------------
🌳 Support and Contact!
🔸Website - https://www.skilltree.how/
🔸Patreon - patreon.com/Skilltree
🔸Discord - discord.gg/skilltree
🔸Amazon Store Page - amazon.com/shop/skilltree
---------------------------------------------------------------
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
--------------------------------------------------------------
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements.





![A Jack-o’-Lantern That Never Rots
The press I used to emboss my goblins skin: https://s.vevor.com/QT1LJV
Use code VEVT5 for 5% off. (VEVOR sent me this one, thanks VEVOR!)
Jack-o’-lanterns rot. This one won’t. I turned a dried gourd and a pile of scrap leather into a creepy little goblin lantern, a Gobb-o-Lantern, if you will, and in this video I’ll show you how to make your own.
We carve the gourd like a pumpkin, wet-form a leather goblin face right over it, give it some nasty goblin skin texture by pressing random kitchen stuff into the leather (yes, really), then dye it, stitch it, and light it up. It’s Halloween decor that lasts forever, and it’s just as at home on a witch’s staff at your next LARP.
🎃 WHAT YOU’LL NEED
A dried hard-shell gourd (I got a pack of six on Etsy)
Thin veg-tan leather scraps
Razor knife or box cutter (or a Dremel if you want it easy)
Masking tape and a pencil for laying out your design
Leather dye (I mixed buckskin with a little green for that sickly goblin color)
Resist and antiquing gel
Barge cement
An awl, waxed thread and leather cord
An LED light for inside
Texture stuff: quinoa, rice, tin foil, whatever’s in your pantry
🛠 THE PRESS
VEVOR sent me their leather cutting machine (a clicker press) for this video. It’s built for punching out a bunch of the same pattern fast, but I found out it’s also an awesome embossing press. Wet leather, random stuff on top, crank it down, and boom, instant texture. Check it out here: [VEVOR link]
⏱ CHAPTERS
0:00 The Gobb-o-Lantern
0:39 Prepping the gourd
1:38 Designing the face
3:22 Carving the face
4:03 Wet forming the leather
5:20 Stamping leather with anything
8:44 Goblin skin texture
9:40 Shaping the mask
11:01 Adding the nose
11:33 Dyeing
11:43 Ears and stitching
12:51 Antiquing
13:26 Skull details and the handle
14:00 Lights out!
14:45 What monster would you make?
💬 What kind of monster would you make? Gourds come in all kinds of shapes, so tell me in the comments.
⭐ Join Us at Conquest, the Largest LARP in the World!
🔸Buy Tickets here: https://www.skilltree.how/private/p/conquest-2025-dendronia-camp-ticket-1
🔸The Dendronia Discord Server: https://discord.gg/m5HFsVj5ZD
⭐ Check out our MERCH: https://www.skilltree.how/store
⭐Check out Burgschneider 15% off EVERYTHING in their store: https://burgschneider.com/skilltree
🌳 Support and Contact!
🔸Website - https://www.skilltree.how/
🔸Patreon - https://www.patreon.com/Skilltree
🔸Discord - https://discord.gg/skilltree
🔸Amazon Store Page - https://www.amazon.com/shop/skilltree
📫 Skill Tree Mailing Address:
Skill Tree
9 Cornerstone Square, Suite 335
Westford, MA 01886
Links in the description may be affiliate links, which would give us a commission if you use them.
All sounds and stock footage are from Epidemicsound.com & Envato Elements. A Jack-o’-Lantern That Never Rots](https://i.ytimg.com/vi/1rsMfXgOPrk/mqdefault.jpg)




