Uploaded May 2022 | Updated September 2026, 3 weeks ago

---

How to make an easy DIY Fuzz Pedal in 10 minutes - step-by-step instructions on how to build Lego Fuzz pedal for electric guitar. This is one of the simplest circuit (schemes) of fuzz - slightly modified Bazz Fuss.
So, why Lego? First of all, for me every fuzz sounds as it is made of plastic. Secondly - Lego allows us to make this pedal without special tools. And most importantly - you can make a design of any color, decorate with any elements, and it will always be original!
You can make this pedal even if you have no experience at all. Then it will take you about 10 minutes (plus about 15-20 minutes for the Lego enclosure). But this pedal can be made even in 7 or even 5 min.
Don't be afraid to experiment! You can use slightly different details. For example, instead of 1n4148 diode can be 1n914 diode, instead of 4.7μF Electrolytic Capacitor you can use 2.2μF.

You will need:
Transistor MPSA13
Diode 1n4148
Film Capacitor 100nf
10k Resistor
Electrolytic Capacitor 4.7μF
100k potentiometer
DPDT Foot Switch Push Button
Two jacks – stereo for input and mono for output
9-volt Battery Connector

#GuitarPedal #FuzzPedal #LegoFuzz #GuitarDIY #ElectricGuitar #DIYguitarpedal