Uploaded November 2026 | Updated November 2026, 5 days ago
The basin is designed, so now it has to actually get cast.
In Part 2, Claude and the Autodesk Assistant tools in Fusion build the whole plywood mould around it. Outer forms, inner core, 2x4 bracing, and a cut list I can take straight to the shop. About eight 2x4s, a couple of 2x6s and two sheets of plywood, with the rebate strips ripped down from the 2x6s to save material.
The useful part was what it flagged. Wet concrete pushes up on the empty core with roughly 600 lb of uplift, which had never crossed my mind. It worked out the pressure at the bottom of the form too, around 300 psf. It was straight with me that it hadn’t actually solved either one, so the walers still need ties and the core needs filling or strapping before anything gets poured. Those are mine to sort out.
It also built in the lip so the grate sits flush, and nested the supports to keep the material cost down. Took about five to ten minutes while I got on with something else.
This is the full path from idea to build-ready mould, with AI doing the heavy lifting. Well, right up until I have to buy 28 bags of concrete.
►FREE TRIAL | https://autode.sk/3Wtfi20
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER | https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb
The basin is designed, so now it has to actually get cast.
In Part 2, Claude and the Autodesk Assistant tools in Fusion build the whole plywood mould around it. Outer forms, inner core, 2x4 bracing, and a cut list I can take straight to the shop. About eight 2x4s, a couple of 2x6s and two sheets of plywood, with the rebate strips ripped down from the 2x6s to save material.
The useful part was what it flagged. Wet concrete pushes up on the empty core with roughly 600 lb of uplift, which had never crossed my mind. It worked out the pressure at the bottom of the form too, around 300 psf. It was straight with me that it hadn’t actually solved either one, so the walers still need ties and the core needs filling or strapping before anything gets poured. Those are mine to sort out.
It also built in the lip so the grate sits flush, and nested the supports to keep the material cost down. Took about five to ten minutes while I got on with something else.
This is the full path from idea to build-ready mould, with AI doing the heavy lifting. Well, right up until I have to buy 28 bags of concrete.
►FREE TRIAL | https://autode.sk/3Wtfi20
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER | https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb










