Humphrey Wittingtonsworth IV | I invented a better Pringles can @HumphreyWittingtonsworthIV | Uploaded November 2018 | Updated October 2024, 13 hours ago.
Download file here if you want one:
drive.google.com/open?id=1Tcx5Vzx4RabSWR1dfOzzCYtgvsqMsllr
Basically, my hands are big and don't fit the pringles can, so I invented a twist can that dispenses them for me. You just twist the base, and all of the pringles rise up to the top.
Normal pringles cans have TONS of room inside, so when you carry the can around, the chips fall around and break.
The Pringler only allows 2mm of wiggle room, keeping your pringles intact!!!
It fits a WHOLE can of pringles and is basically the same size dimensionally.
It turns smooth and it's airtight if you have a 76mm diameter O-ring.
The normal pringles lid will fit the can, and the file is toleranced for even low level printers to print it smoothly
if you print one, tell me how it works for you!!!
Download file here if you want one:
drive.google.com/open?id=1Tcx5Vzx4RabSWR1dfOzzCYtgvsqMsllr
Basically, my hands are big and don't fit the pringles can, so I invented a twist can that dispenses them for me. You just twist the base, and all of the pringles rise up to the top.
Normal pringles cans have TONS of room inside, so when you carry the can around, the chips fall around and break.
The Pringler only allows 2mm of wiggle room, keeping your pringles intact!!!
It fits a WHOLE can of pringles and is basically the same size dimensionally.
It turns smooth and it's airtight if you have a 76mm diameter O-ring.
The normal pringles lid will fit the can, and the file is toleranced for even low level printers to print it smoothly
if you print one, tell me how it works for you!!!