Uploaded December 2020 | Updated November 2026, 3 hours ago
Sometimes it was difficult to attach the crocodile clip to some milling bits. Especially on bigger bits where the shaft has nothing for the clip to grab on, like chamfer bits. So I decided to ground the spindle of my Mostly Printed CNC (MPCNC) to get rid of the crocodile clip. My solution has to be working with a 3D Printed Spindle holder, and should not damage the spindle itself. This is my solution to this problem.
ISBI
Homepage : isimplybuiltit.com
----------------------------------------------------------------------------------------------------------------
If you want to support my YouTube-Channel you can donate here :
paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
instagram.com/i_simply_built_it
TWITTER :
twitter.com/ISIMPLYBUILTIT
PINTEREST
https://www.pinterest.ch/isimplybuiltit/
FACEBOOK :
facebook.com/ISIMPLYBUILTIT
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
DON'T TRY THIS AT HOME :
I am a do-it-yourselfer and this is a private hobby video,
by showing me how to solve special tasks! The video is not an
instructional video and is not intended to be imitated!
That's why : All information and tips without guarantee!
Everyone is responsible for his actions and is responsible
for his own mistakes! For all work, the general observe
occupational health and safety regulations! I do not assume
any liability for damages and injuries!
Sometimes it was difficult to attach the crocodile clip to some milling bits. Especially on bigger bits where the shaft has nothing for the clip to grab on, like chamfer bits. So I decided to ground the spindle of my Mostly Printed CNC (MPCNC) to get rid of the crocodile clip. My solution has to be working with a 3D Printed Spindle holder, and should not damage the spindle itself. This is my solution to this problem.
ISBI
Homepage : isimplybuiltit.com
----------------------------------------------------------------------------------------------------------------
If you want to support my YouTube-Channel you can donate here :
paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
instagram.com/i_simply_built_it
TWITTER :
twitter.com/ISIMPLYBUILTIT
https://www.pinterest.ch/isimplybuiltit/
FACEBOOK :
facebook.com/ISIMPLYBUILTIT
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
DON'T TRY THIS AT HOME :
I am a do-it-yourselfer and this is a private hobby video,
by showing me how to solve special tasks! The video is not an
instructional video and is not intended to be imitated!
That's why : All information and tips without guarantee!
Everyone is responsible for his actions and is responsible
for his own mistakes! For all work, the general observe
occupational health and safety regulations! I do not assume
any liability for damages and injuries!








![How to Make a Disc Sander / Part 2 of 2
Watch Part 1 first : https://www.youtube.com/watch?v=Cq836l2lDas&t=4s
I had a 1.5 Hp Motor lying around. So i decide to make a Disc Sander out of it.
Enjoy the video and give it a thumb up and subscribe if you like this video.
ISBI
#ISimplyBuiltIt
Watch my other Videos :
Table saw dust hood : https://www.youtube.com/watch?v=TkYoLxlHAD0
Track: Culture Code - Feel Again (feat. Harley Bird) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/YGLA_V_yZXo
Free Download / Stream: http://ncs.io/FeelAgainYO How to Make a Disc Sander / Part 2 of 2](https://i.ytimg.com/vi/lBE5Ultk5lA/mqdefault.jpg)

