Peter Millard | I fit Wood Slat Panelling in a London Victorian Alcove [video 560] @10MinuteWorkshop | Uploaded 8 months ago | Updated 1 hour ago
#AD Thanks to Skillshare for sponsoring this video; the first 500 people to use this link will get a 1 month free trial of Skillshare - https://skl.sh/petermillard02241
In this one we go back to before Christmas when I was fitting wood slat panelling to our newly created downstairs WC - all part of the ground floor #Victorian #house #renovation that will be coming along in a set of videos shortly.
This was the most fiddly job I’ve done in a while, battling wonky Victorian walls and trying to make the most of the offcuts of panelling we had. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free 'Simple Drawer Construction' factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member* and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Other videos and playlists of interest:-
No Going Back; kitchen Extension in a Victorian London House - youtu.be/eULepp_7CIM
Lath & Plaster Wall Repair - youtu.be/qZojl5Gv8ZE
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Oak and Birch ply drawers - youtu.be/tIbJ-93TMZw
Baltic Birch Basics - youtu.be/GRMpFTuq_V0
Festool’s Big Mistake? - youtu.be/Wc0MOV3HtjI
Why Buy This Saw - youtu.be/u7H5On0j_5c
Benchdogs CSC SYS Fence System - youtu.be/QmQW4YbCT3I
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
3M strong double-sided tape - amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - amzn.to/3th16eL
Hi-tack MS Polymer adhesive - amzn.to/3HWQIjz
Nitrile gloves - amzn.to/3SxVDfO
Plastic packers - amzn.to/3JawQtF
#AD Thanks to Skillshare for sponsoring this video; the first 500 people to use this link will get a 1 month free trial of Skillshare - https://skl.sh/petermillard02241
In this one we go back to before Christmas when I was fitting wood slat panelling to our newly created downstairs WC - all part of the ground floor #Victorian #house #renovation that will be coming along in a set of videos shortly.
This was the most fiddly job I’ve done in a while, battling wonky Victorian walls and trying to make the most of the offcuts of panelling we had. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free 'Simple Drawer Construction' factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member* and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Other videos and playlists of interest:-
No Going Back; kitchen Extension in a Victorian London House - youtu.be/eULepp_7CIM
Lath & Plaster Wall Repair - youtu.be/qZojl5Gv8ZE
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Oak and Birch ply drawers - youtu.be/tIbJ-93TMZw
Baltic Birch Basics - youtu.be/GRMpFTuq_V0
Festool’s Big Mistake? - youtu.be/Wc0MOV3HtjI
Why Buy This Saw - youtu.be/u7H5On0j_5c
Benchdogs CSC SYS Fence System - youtu.be/QmQW4YbCT3I
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
3M strong double-sided tape - amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - amzn.to/3th16eL
Hi-tack MS Polymer adhesive - amzn.to/3HWQIjz
Nitrile gloves - amzn.to/3SxVDfO
Plastic packers - amzn.to/3JawQtF
![I fit Wood Slat Panelling in a London Victorian Alcove [video 560]](https://i.ytimg.com/vi/72tHtKNli-E/hqdefault.jpg "I fit Wood Slat Panelling in a London Victorian Alcove [video 560]
#AD Thanks to Skillshare for sponsoring this video; the first 500 people to use this link will get a 1 month free trial of Skillshare - https://skl.sh/petermillard02241
In this one we go back to before Christmas when I was fitting wood slat panelling to our newly created downstairs WC - all part of the ground floor #Victorian #house #renovation that will be coming along in a set of videos shortly.
This was the most fiddly job I’ve done in a while, battling wonky Victorian walls and trying to make the most of the offcuts of panelling we had. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free Simple Drawer Construction factsheet, included in the next issue!
Can’t wait? Become a 10minuteworkshop Plus member* and get the free factsheet and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Other videos and playlists of interest:-
No Going Back; kitchen Extension in a Victorian London House - https://youtu.be/eULepp_7CIM
Lath & Plaster Wall Repair - https://youtu.be/qZojl5Gv8ZE
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Oak and Birch ply drawers - https://youtu.be/tIbJ-93TMZw
Baltic Birch Basics - https://youtu.be/GRMpFTuq_V0
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
Why Buy This Saw - https://youtu.be/u7H5On0j_5c
Benchdogs CSC SYS Fence System - https://youtu.be/QmQW4YbCT3I
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
3M strong double-sided tape - https://amzn.to/3u2Ekqw
‘Everyday’ double-sided tape - https://amzn.to/3th16eL
Hi-tack MS Polymer adhesive - https://amzn.to/3HWQIjz
Nitrile gloves - https://amzn.to/3SxVDfO
Plastic packers - https://amzn.to/3JawQtF")
![Plywood Cabinets - no router, no dado stack [video 556]](https://i.ytimg.com/vi/7HTeoPNl9VI/hqdefault.jpg "Plywood Cabinets - no router, no dado stack [video 556]
#AD The first 500 people to click my link will get a one month free trial of Skillshare: https://skl.sh/petermillard12231
In last weeks video I made a pair of workshop cabinets, and in this one I’m making the double that sits between them; like before, I’ll be making it without a tape measure, a ruler or a square, and without nails, screws or any other kind of fixing, and no table saw, no dado stack, no router, just a tracksaw.
Though not just any tracksaw, my first tracksaw actually, the Festool TS55 I bought in 2008, the one that I used to build my fitted furniture business from scratch. Who’s interested in a ‘Why buy quality tools’ video in the New Year?
This is my last public video of 2023. Thanks everyone, and enjoy the break.
Peter
Stuck for gift ideas? Honestly, you’ve probably left it a bit late, but check out my 2023 Gift List video here - https://youtu.be/cCOUz_tmVeY
Not sure which glue to use? Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free 5 Glues I use factsheet.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Browse the Amazon Black Friday deals - https://www.amazon.co.uk/blackfriday?tag=tracking-21
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Plywood shop cabinets, no tape, no rule, no square - https://youtu.be/VVYDTVVZFxg
5 Fake Joints - https://youtu.be/V1nWpH6EyL4
Plywood reference square - https://youtu.be/aNjO4SBe5kw
Easy accurate repeat cuts - https://youtu.be/vHX5j2820nk
Which glue when? - https://youtu.be/yEQYirGvWCs
Tracksaw workshop Playlist - http://bit.ly/TracksawWorkshop
Base cabinet basics - https://bit.ly/BaseCabBasics
Cabinetry basics playlist - http://bit.ly/CabinetryBasics
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
See the full Gift List 2023 on Amazon here - https://amzn.to/3R6GjHG")
![Portable Bench Build [video 426][Gifted/Ad**]](https://i.ytimg.com/vi/7OqrljJHOaw/hqdefault.jpg "Portable Bench Build [video 426][Gifted/Ad**]
In this weeks video I build a portable bench from just a half-sheet of #birch #plywood, and an #MFT -style top. Enjoy!
.
Bench plans available here - http://bit.ly/PortableBench
.
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
.
https://bit.ly/bench-dogs
http://bit.ly/raildogs
.
Unfortunately Formatic CNC appear to have stopped making MFT tops, but I’m happy to say that Chris Smith Furniture has agreed to make the 1200mm top available from his eBay store, link here:- https://ebay.us/lAXHEQ
NB; as an eBay Partner Network member, I may earn from qualifying purchases made through the above link.
You may also adapt an off-the-shelf MFT 1080 top (1080 1165 x 725) or MFT/3 top (1102 x 718) to fit. Or make your own, of course, with one of the many commercial jigs available.
.
Peanut 2 system at Axminster tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanutr-2-connecting-system-package-720761
Peanut 2 system from Intelligent Fixings - http://shop.intelligentfixings.com?ref=10minuteworkshophttp://bit.ly/Peanut2connector
...and thanks to AxminsterTools.com for the opportunity to try the system out.
++++++++
Other videos mentioned:-
402 Rail square - https://youtu.be/qik-UoZUAgg
420 Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
422 Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
424 LR32 MFT - https://youtu.be/C_J-PKrUo1Y
Ron Paulk Bench - https://www.youtube.com/watch?v=Bt77_jugVZs
Scott Brown bench - https://www.youtube.com/watch?v=s23XaufUJgQ&t=204s
Tim Willmots MTFC - https://www.youtube.com/watch?v=t5YzIwK-g0E&t=317s
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
See the channel blog for more direct links - http://bit.ly/10minuteBlog
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Folding leg brackets - https://amzn.to/3mW7xyS (US: [similar] https://amzn.to/3mZJ6k7)
Strap handle - https://amzn.to/36blVwn (US: [similar] https://amzn.to/3p1l5ec)
Buttonfix - https://amzn.to/2JIXa35 (US: http://bit.ly/buttonfix_US)
Peanut 2 connector system - http://bit.ly/Peanut2connector
Benchdogs Rail Dogs - http://bit.ly/raildogs
Trend MFT router jig - https://amzn.to/34wSp3b
Benchdogs rail square - https://bit.ly/bench-dogs
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)")
![5 Questions to Robin Clevett [video 522]](https://i.ytimg.com/vi/7ZjjaXfYXmI/hqdefault.jpg "5 Questions to Robin Clevett [video 522]
I had the privilege of being invited to Berlin recently for the Creator Summit EU courtesy of Amazon’s Influencer Program, an event that was focussed more on fashion, beauty and lifestyle than woodworking, so it was my absolute pleasure to catch up with the other woodworker in the room, Mr Robin Clevett @ukconstruction
Robin was co-presenter of the SkillBuilder channel before starting his own eponymous YouTube, he presents the Carpentry Show on Fix Radio, and is one of the more prominent carpenters on social media. We took a few minutes out of the event to ask each other a few questions, appropriately in the Mens Grooming section, and here’s how it went…
See my answers to Robin’s questions over on Robin Clevett’s channel - https://youtu.be/i1EPztxaqpU
Watch the uncut version of this chat over on 10MinuteWorkshop Plus - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Full list of individual products used in this video below, or browse my Amazon store at 10MinuteAmazon.com
Join the Amazon Influencer Program here - https://affiliate-program.amazon.co.uk/influencers?referrer=PETER
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other popular videos:-
Drawer Cabinet - https://youtu.be/5oJshwlDVKo
Top Drawer! - https://youtu.be/HcNRId9a3Lw
How I fit double extension drawer slides - https://youtu.be/eK8NlFYfUMc
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Torsion box Router Bench - https://youtu.be/Q-Vyq4ShHT0
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Browse the full list for this video here - https://amzn.to/3lrmmyn
Browse my Amazon store here - 10MinuteAmazon.com
Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted without obligation) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Mid-70s style Walnut Footstool [video 503]](https://i.ytimg.com/vi/7rqgfww9SCU/hqdefault.jpg "Mid-70s style Walnut Footstool [video 503]
In this video I make a #footstool in #Walnut based on the design of one I made in school in the #mid-70s. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Support 10 Minute Workshop as a YouTube Member http://bit.ly/10minuteMember
Support 10 Minute Workshop on Patreon - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Cotton-reel drill jig - https://youtu.be/iueaEE9GSKE
Random Orbital Disc Sander - https://youtu.be/jH2afycjcbM
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Matchfit Microjig Dovetail Clamp System - https://youtu.be/uiT6F-K26Tg
Used/featured in this video:-
SanderCard - https://amzn.to/3c1yh17 (US - https://amzn.to/3QUvcz2)
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Benchdogs precision rulers (Gifted) - hhttps://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
+++++++++")
![Gift ideas 2020 [Video 430][Gifted/Ad**]](https://i.ytimg.com/vi/83H1PxwmwqE/hqdefault.jpg "Gift ideas 2020 [Video 430][Gifted/Ad**]
In this longer video I go through a few #gift #ideas for #makers, from pocket-money stocking fillers, to a few of things that are a bit more indulgent, there should be something on this list for everyone.
I make one of these ‘gift idea’ videos every year, so if there’s nothing on this list that tickles your fancy, then maybe take a look at one of the other vids 👍
Gifts to receive 2017 P1 https://youtu.be/Mma0Cysf3hw
Gifts to receive 2017 P2 https://youtu.be/0zgHBdGNkFU
Gifts for Makers 2018 P1 https://youtu.be/4PKLI4DbGbU
Gifts for makers 2018 P2 https://youtu.be/Izy_oKLqXwY
Gifts for Makers 2019 - https://youtu.be/8YDUxFPVnkY
++++++++
My Etsy - http://bit.ly/10minuteShop
Buy a quilt from Mrs 10minutes - https://www.etsy.com/uk/shop/lindahandmadequilts
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links in one place - https://www.10minuteworkshop.com/links
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
Support the channel on Patreon - http://www.patreon.com/10minuteworkshop
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
Featured in this video:-
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
.
https://bit.ly/bench-dogs
http://bit.ly/raildogs
++++++++
Mick at Formatic CNC - 5% discount on an MFT top using the offer code “10minuteworkshop” at checkout. - 600 x 1200 - http://bit.ly/MFT-1200
++++++++
Mike at OutpostWorkshopUK for branding irons and stamps - https://www.etsy.com/uk/shop/OutpostWorkshopUK
++++++++
Strawbyte waste side jigs - thanks Karl! - http://bit.ly/Strawbyte_jigs (10% off with the offer code “10minuteworkshop” )
Makers Mallet, Paul Cunningham - https://www.instagram.com/cunninghamscustomcreations/
Dual Purpose rail clips, Kevin Parr - http://ebay.us/N7o4uD
Marking knife - https://www.instagram.com/simply_orn8/ or https://www.etsy.com/uk/shop/SimplyOrN8
Made by Idriss - https://www.etsy.com/uk/shop/MadeByIdriss
The Block Scribe - www.theblockscribe.co.uk (15% off with the offer code “10minuteworkshop”)
Trend snappy self-centering bit set - https://amzn.to/38FuzpO (US:[similar] https://amzn.to/39FK81g)
Knipex Cobra XS grips - https://amzn.to/36DAWZh (US: nope, sorry)
Hybro 3.6v electric screwdriver - https://amzn.to/2T3ofiZ (US: [similar] https://amzn.to/311Ey3Q)
Dowel jig - https://amzn.to/3j0bD7V (US: similar - https://amzn.to/308RTpR)
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bic Matic pencils - https://amzn.to/37xfx35 (US: [similar] https://amzn.to/3g4o5SZ)
Staedtler Noris pencil - http://amzn.to/2A01WQk (US: http://amzn.to/2hmFVDw)
SewLine white leads - https://amzn.to/3mB88WM (US: https://amzn.to/3qoIPcK)
Staedtler 925-25 09 - https://amzn.to/37uvAi5 (US: https://amzn.to/37ANiAN)
Erasers - https://amzn.to/3olfWN2 (US:https://amzn.to/37tZzqB)")
![Which Drawer Slide When? [video 527]](https://i.ytimg.com/vi/85vZbjPrw50/hqdefault.jpg "Which Drawer Slide When? [video 527]
In this one I take a quick look at the various pros and cons of each type of drawer fitting, from a simple box to commercial concealed runners with soft-close built-in. Enjoy!
Full list of individual products used in this video below, or browse my Amazon store at www.10MinuteAmazon.com
Interested in finding a real Birch ply alternative, or how to make a Triton Doweller work decently? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Drawer Cabinet - https://youtu.be/5oJshwlDVKo
Top Drawer! - https://youtu.be/HcNRId9a3Lw
My cheap nailer and compressor - https://youtu.be/eJo3JMkv3JE
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Torsion box Router Bench - https://youtu.be/Q-Vyq4ShHT0
Birch ply drawer router cabinet - https://youtu.be/BfV0426rog0
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
Note that prices fluctuate - some have risen since I made my purchases.
Browse the full list for this video here - https://amzn.to/3BwepMI
Visit my Amazon store here - 10MinuteAmazon.com
Soft close drawer slides - https://amzn.to/3ZrOvDU (US: [similar] https://amzn.to/3L2vofj)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Adjustable cabinet feet - https://amzn.to/3XzQfJH (US: [similar] https://amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Raised Panel Cabinet Doors in MDF [*Ad] [video 548]](https://i.ytimg.com/vi/94TGcWe7PBI/hqdefault.jpg "Raised Panel Cabinet Doors in MDF [*Ad] [video 548]
Hi hope you’re well. So I made some base cabinets recently and in this one I’m making some raised panel doors for them.
#woodworking #basicwoodworking #basecabinet
[*Ad] This video is sponsored by Medite. You know Medite, they make top quality MDF, and every painted set of shelves, bookcases, wardrobes , cabinets or doors you may have seen me make on this channel was made with Medite MR or Moisture Resistant MDF, and in this video I’m using Medite’s ultimate MRMDF, Medite Optima.
Visit meditesmartply - links below - for more information on the product and stockists, and I’d like to thank Medite for the opportunity to use Optima on this project.
https://mdfosb.com/en/products/medite-optima?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
https://www.meditemakesitreal.com/?utm_campaign=MEDITE&utm_source=YouTube&utm_medium=Peter_millard
++++++++
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email and get the free 5 Glues I use fact sheet; actually, it might be 6... 🤔
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Base Cabinet Basics - https://youtu.be/XQNeiPvEQ1I
Shaker-style cabinet doors - https://youtu.be/Px3D7wqycUc
Two easy doors - https://youtu.be/jwGvYsvdCg4
Previous series, Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
I used the panel raising bit from Wealden tool - https://bit.ly/PanelRaisingBit
And their 1/4” grooving bit - https://bit.ly/SmallGroovingBit
Adjustable cabinet feet - https://amzn.to/3FigrSf
SpacePlugs -https://amzn.to/3S1Xtaf")
![3 MFT Tops, 3 MFT jigs [Video 498]](https://i.ytimg.com/vi/9DhLQPrjnik/hqdefault.jpg "3 MFT Tops, 3 MFT jigs [Video 498]
[Gifted/Ad**] In this longer video I take a look at three different ways to make your own MFT (MultiFunction Table) tops using the UJK Parf Guide 2 System from Axminster Tools, the Trend MFT/jig and the RS Pro jig from CNC design. Enjoy!
** The UJK Parf Guide 2 was supplied for review by Axminster Tools and Machinery, and the Trend MFT/jig was supplied for review by Trend Tool Technology. I purchased the RS Pro jig myself. I have not been paid to make this video or say nice things about the products.
***
Extended version of this video where I go into the pros and cons of each system on my member platforms now. 10minuteworkshop.plus
***
Some product links may be affiliate links; I may earn from qualifying sales, at no additional cost to yourself. Thank you for using these links if you decide to make a purchase.
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
UJK Parf Guide 2 - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/ujk-technology-parf-guide-system-mkii-104779?utm_source=tag&utm_medium=affiliates&utm_content={TAG.AID}&tagrid={TAG.RID}&queryID=ec0282050634baed67071081df95ec0c
Trend MFT/jig - https://amzn.to/3yii5AO
Trend 20mm router bit - https://amzn.to/3NqZ3MO
Trend T12 Router - https://amzn.to/3QRiDVk
RSPro jig - https://bit.ly/CNCDesignMFT
Rennie tools 12.7mm straight bit - https://www.rennietool.co.uk/products/1-2-12-7mm-shank-tungsten-carbide-tipped-tct-straight-flute-router-bit?_pos=1&_sid=7a3561efe&_ss=r&variant=20039147257929?aff=2
As a Benchdogs UK affiliate I may earn from qualifying sales; use the offer code “10minuteworkshop” for a 5% discount across the board at Benchdogs.co.uk.
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Benchdogs carpenter’s square - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs rail square - https://bit.ly/bench-dogs
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![3 Easy Wins - Soundproofing a Workshop Wall [video 469]](https://i.ytimg.com/vi/9OH4Blo6lDs/hqdefault.jpg "3 Easy Wins - Soundproofing a Workshop Wall [video 469]
The workshop makeover continues, and in these related videos I’ll be going through three easy things you can do to improve your workshop. In this #workshop #improvement video I’ll be opening up the wall between me and my lovely neighbours to add a bit of #soundproofing to keep their sounds out, and my sounds in. Enjoy!
++++++++
This is one of 3 Easy Workshop Wins
Another, Benchtops, is here - https://youtu.be/XVSp9yDmGYM
And another, Lights & Lighting, is here - https://youtu.be/9U80Tl8s32I
Related videos:-
Timberyard tour - https://youtu.be/W66tCi3KT3s
LED shop lights (original) - https://youtu.be/TrukKsGFGO8
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate and eBay Partner, I earn from qualifying purchases made through these links. As a Benchdogs affiliate I may earn from qualifying purchases; use offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video series:-
Intumescent Caulk - https://amzn.to/2XGN1em (US: -
Acoustic caulk - https://amzn.to/2Z3DD4R (US: -
LED Panels - https://ebay.us/tkUHcK
LED Batten - https://ebay.us/Tn7XeH
3M 9088 double-sided tape - https://amzn.to/3u2Ekqw
First4magnets magnetic tape - https://bit.ly/3AADPqi
Excel guiderail - https://bit.ly/2YJ66g9
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square (gifted) - https://bit.ly/bench-dogs
Other useful gear:-
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)")
![I bought them all so that you dont have to! [video 589]](https://i.ytimg.com/vi/9SHIrwWMiz8/hqdefault.jpg "I bought them all so that you dont have to! [video 589]
In this one I take a 2024 look at the state of guide rails from OEMs and third parties to help you choose which rails are worth the money and how to avoid an expensive mistake. Get it right! 👍
Table of Contents:
00:00 Introduction
00:43 Overview
01:43 Festool - defacto standard?
02:58 Evolution G2 - the closest copy
03:45 Lidls Parkside rails
04:52 Makita and copies
05:55 The Makita rail problem
06:58 Metabo
07:15 Milwaukee
07:34 Einhell
08:04 DeWalt
08:31 Mafell & Bosch
09:06 Outro
Related content:
Lidl Parkside plunge saw - https://youtu.be/kFyDGdH66HM
Skil saw or plunge saw - https://youtu.be/cV3DjNlZq8s
Making connections; the essential guide to guiderail connectors - https://youtu.be/fAhSvhD2zEo
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Evolution R185 CSSX Li saw - https://youtu.be/HtJFtP-kDPI
One Smaller Stool - https://youtu.be/KDe7ZQO83mE
Metabos £200/$250 MFT - https://youtu.be/aWozkUUDdc8
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Excel £80 mini-me MFT - https://youtu.be/wtaUuaV54Xk
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Portable workbenches - https://amzn.to/4csRhOW
Tracks and tracksaw accessories - https://amzn.to/3XU5tLK")
![3 Easy wins - Lights and Lighting [video 471]](https://i.ytimg.com/vi/9U80Tl8s32I/hqdefault.jpg "3 Easy wins - Lights and Lighting [video 471]
The workshop makeover continues, and in these related videos I’ll be going through three easy things you can do to improve your workshop. In this #workshop #improvement video its all about lights and #lighting. Enjoy!
++++++++
This is one of 3 Easy Workshop Wins
Soundproofing a workshop wall is here - https://youtu.be/9OH4Blo6lDs
And Benchtops is here - https://youtu.be/XVSp9yDmGYM
Related videos:-
Timberyard tour - https://youtu.be/W66tCi3KT3s
LED shop lights (original) - https://youtu.be/TrukKsGFGO8
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate and eBay Partner, I earn from qualifying purchases made through these links. As a Benchdogs affiliate I may earn from qualifying purchases; use offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video series:-
Lumens explained - https://en.wikipedia.org/wiki/Lumen_(unit)
Intumescent Caulk - https://amzn.to/2XGN1em
Acoustic caulk - https://amzn.to/2Z3DD4R
LED Panels - https://ebay.us/tkUHcK
LED Batten - https://ebay.us/Tn7XeH
3M 9088 double-sided tape - https://amzn.to/3u2Ekqw
First4magnets magnetic tape - https://bit.ly/3AADPqi
Neewer light diffuser material - https://amzn.to/3m8SIu7
Excel guiderail - https://bit.ly/2YJ66g9
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square (gifted) - https://bit.ly/bench-dogs
Other useful gear:-
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
