Uploaded December 2025 | Updated November 2026, 2 days ago
Put your home equity to work! See if you qualify and get a free offer in 3 minutes with no hard credit pull at aven.com/creators?utm_source=johnnybuilds&utm_medium=yt
I thought I understood tambour… and then I tried to make a veneer tambour cabinet inspired by a $20,000 art piece. Veneer + tambour is way harder than anything I’ve done before – I had to reverse–engineer the process from artists who intentionally never show how they do it, make 200 plywood strips, invent my own razor-blade tool, and fix about 1,000 little screwups along the way.The twist?
I finally cracked the mystery, built the nicest record cabinet I’ve ever made… and I refuse to sell it. It’s going to my daughter as a housewarming gift instead.
👇 More details, links, and gear below.
🧪 Tools & Materials Featured
(Links may be affiliate links. They don’t cost you anything extra, but they help support the channel.)
👨🏭🔥 Lincoln Electric Welding Gear:
Welder: bit.ly/44GaPxt
Helmet: bit.ly/3TzIZ11
Fume Extractor: bit.ly/44IVmwB
🪚 Rockler Woodworking & Hardware
Lumber, router bits, shop supplies, and a lot of the hardware I use in my builds.
Rockler → rockler.com
🫗Epoxy (Get a discount at TotalBoat.com 👇)
• TotalBoat Fathom (2:1 deep-pour): https:totalboat.com/jonnybuilds
• TotalBoat ThickSet (new 1:1): https:totalboat.com/jonnybuilds
🎵 Turntable Setup
U-Turn Audio Orbit Turntable → uturnaudio.com
Black Canvas Cloth: amzn.to/4a3Eaqc
More tools and materials are shown on screen throughout the video.
🔧 What Went Down (Highlights)
Milling big walnut slabs into panels for a complex inner cabinet
14 panels glued up… then realizing several are the wrong size 🤦♂️
Dados and rabbets everywhere for a super clean, satisfying dry fit
Deep dive into high-end veneer (Claro walnut from a specialty supplier)
Designing the tambour groove and fixing CNC tear-out with grain-matched patches
Cutting 200 plywood strips, routing tabs on both ends, and painting edges black
Building custom forms to keep strips from shifting while gluing
Taping every single strip on both sides so the glue doesn’t lock them together
Inventing a custom razor-blade tool to slice the veneer apart without wrecking it
Canvas backer, veneer on drawer bottoms, and matching curly maple/walnut pulls
Welding and powder-coating the steel base, then final assembly and reveal
Delivering the finished cabinet to my daughter instead of selling it
⏱️ Chapters
(I’ll add timestamps here after the video goes live.)
Cold open – “How the hell is he doing that?”
Detective setup – reverse-engineering a $30K cabinet
Milling walnut & building the inner cabinet
Death by a thousand cuts (panel mistakes)
Dry fit & ultra-satisfying joinery
Veneer deep dive & design decisions
CNC grooves + fixing tear-out
Tambour strip strategy & forms
Painting edges, prep, and veneer layout
Custom razor tool & cutting the strips apart
Canvas backer, drawers, and pulls
Welding the steel base & powder coat
Final assembly & finish
Why I won’t sell this—and who it’s actually for
💬 Tell me in the comments:
Would you keep this cabinet, try to sell it, or give it away like I did?
And what would you build with that crazy olive ash burl veneer?
📸 Follow for behind-the-scenes
Instagram → instagram.com/jonnybuilds
TikTok → tiktok.com/@jonnybuilds
Website → jonny-builds.com
⚠️ Safety
Woodworking, welding, epoxies, and power tools are dangerous.
Wear PPE, follow manufacturer instructions, know your limits, and check your local regulations.
Sponsored by Aven Financial, Inc. dba Aven or "AvenCard" (in AR, ID, and PA), 548 Market St # 99555, San Francisco, CA 94104. NMLS # 2042345. Subject to credit approval. Certain terms and conditions may apply, may vary by applicant and are subject to change.Limited to certain states - see aven.com/licenses for details. All relevant disclosures for this video are included at aven.com. The Aven Card is issued by Coastal Community Bank, pursuant to a license from Visa U.S.A., Inc. Aven accounts are made by Coastal Community Bank, Member FDIC. Equal Housing Lender. NMLS # 462289 (nmlsconsumeraccess.org
)
Put your home equity to work! See if you qualify and get a free offer in 3 minutes with no hard credit pull at aven.com/creators?utm_source=johnnybuilds&utm_medium=yt
I thought I understood tambour… and then I tried to make a veneer tambour cabinet inspired by a $20,000 art piece. Veneer + tambour is way harder than anything I’ve done before – I had to reverse–engineer the process from artists who intentionally never show how they do it, make 200 plywood strips, invent my own razor-blade tool, and fix about 1,000 little screwups along the way.The twist?
I finally cracked the mystery, built the nicest record cabinet I’ve ever made… and I refuse to sell it. It’s going to my daughter as a housewarming gift instead.
👇 More details, links, and gear below.
🧪 Tools & Materials Featured
(Links may be affiliate links. They don’t cost you anything extra, but they help support the channel.)
👨🏭🔥 Lincoln Electric Welding Gear:
Welder: bit.ly/44GaPxt
Helmet: bit.ly/3TzIZ11
Fume Extractor: bit.ly/44IVmwB
🪚 Rockler Woodworking & Hardware
Lumber, router bits, shop supplies, and a lot of the hardware I use in my builds.
Rockler → rockler.com
🫗Epoxy (Get a discount at TotalBoat.com 👇)
• TotalBoat Fathom (2:1 deep-pour): https:totalboat.com/jonnybuilds
• TotalBoat ThickSet (new 1:1): https:totalboat.com/jonnybuilds
🎵 Turntable Setup
U-Turn Audio Orbit Turntable → uturnaudio.com
Black Canvas Cloth: amzn.to/4a3Eaqc
More tools and materials are shown on screen throughout the video.
🔧 What Went Down (Highlights)
Milling big walnut slabs into panels for a complex inner cabinet
14 panels glued up… then realizing several are the wrong size 🤦♂️
Dados and rabbets everywhere for a super clean, satisfying dry fit
Deep dive into high-end veneer (Claro walnut from a specialty supplier)
Designing the tambour groove and fixing CNC tear-out with grain-matched patches
Cutting 200 plywood strips, routing tabs on both ends, and painting edges black
Building custom forms to keep strips from shifting while gluing
Taping every single strip on both sides so the glue doesn’t lock them together
Inventing a custom razor-blade tool to slice the veneer apart without wrecking it
Canvas backer, veneer on drawer bottoms, and matching curly maple/walnut pulls
Welding and powder-coating the steel base, then final assembly and reveal
Delivering the finished cabinet to my daughter instead of selling it
⏱️ Chapters
(I’ll add timestamps here after the video goes live.)
Cold open – “How the hell is he doing that?”
Detective setup – reverse-engineering a $30K cabinet
Milling walnut & building the inner cabinet
Death by a thousand cuts (panel mistakes)
Dry fit & ultra-satisfying joinery
Veneer deep dive & design decisions
CNC grooves + fixing tear-out
Tambour strip strategy & forms
Painting edges, prep, and veneer layout
Custom razor tool & cutting the strips apart
Canvas backer, drawers, and pulls
Welding the steel base & powder coat
Final assembly & finish
Why I won’t sell this—and who it’s actually for
💬 Tell me in the comments:
Would you keep this cabinet, try to sell it, or give it away like I did?
And what would you build with that crazy olive ash burl veneer?
📸 Follow for behind-the-scenes
Instagram → instagram.com/jonnybuilds
TikTok → tiktok.com/@jonnybuilds
Website → jonny-builds.com
⚠️ Safety
Woodworking, welding, epoxies, and power tools are dangerous.
Wear PPE, follow manufacturer instructions, know your limits, and check your local regulations.
Sponsored by Aven Financial, Inc. dba Aven or "AvenCard" (in AR, ID, and PA), 548 Market St # 99555, San Francisco, CA 94104. NMLS # 2042345. Subject to credit approval. Certain terms and conditions may apply, may vary by applicant and are subject to change.Limited to certain states - see aven.com/licenses for details. All relevant disclosures for this video are included at aven.com. The Aven Card is issued by Coastal Community Bank, pursuant to a license from Visa U.S.A., Inc. Aven accounts are made by Coastal Community Bank, Member FDIC. Equal Housing Lender. NMLS # 462289 (nmlsconsumeraccess.org
)










