I 3D Printed My Son’s House So My Grandson Could Understand It @EDGEOF3D
I 3D Printed My Son’s House So My Grandson Could Understand It  @EDGEOF3D
Uploaded September 2026 | Updated November 2026, 5 days ago
My 6-year-old grandson couldn’t visualize what his dad’s rebuilt house was going to look like — so I 3D printed it for him.

What started as an idea at about 2:00 a.m. turned into a full CAD and 3D printing project.

My son is rebuilding his house, and my grandson has been asking a ton of questions — especially where his room will be. A floor plan doesn’t mean much to a six-year-old, so I decided to make something he could actually hold, walk his fingers through, and understand.

This is Rendition #1 / Print #1 — the first physical version of the house, modeled to scale from the actual exterior dimensions and proposed interior layout.

This print has already been passed around the entire family, and within about 72 hours of the original idea I was printing version three and designing revision four.

This is exactly the kind of direction I want to take EDGE OF 3D: using CAD, 3D printing, and the tools I already have to build things that are useful, personal, and worth making.

More of this project is coming.

=============================

☕ Support EDGE OF 3D on Ko-fi
ko-fi.com/edgeof3d

🧵 Polymaker
shop.polymaker.com/EDGE_OF_3D

Use partner code EDGE_OF_3D for 15% off your first order.

=============================

📸 Instagram
instagram.com/edgeof3d

🎵 TikTok
tiktok.com/@edge_of_3d

▶️ YouTube
youtube.com/@EDGEOF3D/?sub_confirmation=1

𝕏 X / Twitter
twitter.com/edgeof3d

🧪 EO3D Materials Testing
testing.eo3dlabs.com

=============================

#3DPrinting #Fusion360 #CAD #ScaleModel #Farmhouse #3DPrintedHouse #Maker #EDGEof3D #FamilyProject #3DPrintedModel
I 3D Printed My Son’s House So My Grandson Could Understand ItLDO ASA Filament Tested: Tough or Trash?Back To Breaking Things 3.0 | EDGE OF 3DFiberon by Polymaker Launch | EDGE OF 3DBreakfast at Shenzhen before heading to TaiwanInside Creality Shenzhen ChinaPOLYMAKER HT-PLA LAUNCH | EDGE OF 3DPOLYMAKER PANCHROMA REFILLS ARE HERE | EDGE OF 3DMainsail on the Creality K1 series | EDGE OF 3DCreality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3DBack in ChinaThis is where TPU fails
EDGE OF 3D |

I 3D Printed My Son’s House So My Grandson Could Understand It

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER