Uploaded April 2026 | Updated November 2026, 6 hours ago
I have always wanted an RC Go-Kart and after doing lots of other 3D printed projects I figured it was time to try and 3D print one… I mean why not?
The OpenRC project has been around for years and this is built on that original project.
*More info on the OpenRC Go-Kart here:*
printables.com/model/56062-openrc-gokart
As usual I talk you through the plan, the filament choices, hardware and of course show you the build process followed by a test run!
0:00 Intro
0:12 More info on OpenRC Go-Kart
1:59 Filament Choices
4:02 Electronics
5:21 Printing Timelapse Footage
7:29 Building Montage
8:29 First Look at the Completed Go-Kart
8:53 First Test
11:54 Final Thoughts
Overall a very cool little project which could be done much cheaper but i chose to experiment with some slightly more expensive filaments in an attempt to find the most suitable materials for fully 3D printed RC vehicles!
*Price Breakdown:*
OpenRC Go-Kart Files £0
Filament £123
Screws £20
Electronics £51
Bearings £9
Total: *£203/$275*
*I Get my Bearings from here:* rcbearings.co.uk
*My Screws/Hardware from here:* accu.co.uk
*Check out the Bambu Lab products featured in this video here:*
*Bambu Lab H2S:* tidd.ly/4socK4W
*Bambu Lab AMS 2 Pro:* tidd.ly/4phtPe1
*Bambu Lab AMS HT:* tidd.ly/3NqrTm8
*Cheaper alternative Bambu Lab printers:*
*Bambu Lab A1:* tidd.ly/41kxpdH
*Bambu Lab A1 Mini:* tidd.ly/47ShEyk
*Bambu Lab P1S (Enclosed):* tidd.ly/3Pv0AYV
Check out my Giant 1/7 Scale 3D Printed F1 Car Here: youtu.be/ZQTwVKww4qs
*Want to WIN an RC Car for as little as $1/£1?*
Check out my current RC Raffles here: raffall.com/beyondrc
Check out My Second Channel here: youtube.com/@morebeyondrc?sub_confirmation=1
beyondRC © 2026
I have always wanted an RC Go-Kart and after doing lots of other 3D printed projects I figured it was time to try and 3D print one… I mean why not?
The OpenRC project has been around for years and this is built on that original project.
*More info on the OpenRC Go-Kart here:*
printables.com/model/56062-openrc-gokart
As usual I talk you through the plan, the filament choices, hardware and of course show you the build process followed by a test run!
0:00 Intro
0:12 More info on OpenRC Go-Kart
1:59 Filament Choices
4:02 Electronics
5:21 Printing Timelapse Footage
7:29 Building Montage
8:29 First Look at the Completed Go-Kart
8:53 First Test
11:54 Final Thoughts
Overall a very cool little project which could be done much cheaper but i chose to experiment with some slightly more expensive filaments in an attempt to find the most suitable materials for fully 3D printed RC vehicles!
*Price Breakdown:*
OpenRC Go-Kart Files £0
Filament £123
Screws £20
Electronics £51
Bearings £9
Total: *£203/$275*
*I Get my Bearings from here:* rcbearings.co.uk
*My Screws/Hardware from here:* accu.co.uk
*Check out the Bambu Lab products featured in this video here:*
*Bambu Lab H2S:* tidd.ly/4socK4W
*Bambu Lab AMS 2 Pro:* tidd.ly/4phtPe1
*Bambu Lab AMS HT:* tidd.ly/3NqrTm8
*Cheaper alternative Bambu Lab printers:*
*Bambu Lab A1:* tidd.ly/41kxpdH
*Bambu Lab A1 Mini:* tidd.ly/47ShEyk
*Bambu Lab P1S (Enclosed):* tidd.ly/3Pv0AYV
Check out my Giant 1/7 Scale 3D Printed F1 Car Here: youtu.be/ZQTwVKww4qs
*Want to WIN an RC Car for as little as $1/£1?*
Check out my current RC Raffles here: raffall.com/beyondrc
Check out My Second Channel here: youtube.com/@morebeyondrc?sub_confirmation=1
beyondRC © 2026

