Uploaded April 2015 | Updated November 2026, 2 hours ago
Materials. Strips of balsa 2 X 2 mm, glued with "Attack".
Walls covered with aluminum foil from the kitchen. Important:
turning up to 2 mm around the upper edge of the aluminum
to the top list. In high bare copper wire of 0.3 mm diameter,
taut. Provide ability to adjust the distance
between the wire and aluminum, for example by wrapping instead
directly on the vertical struts, around a small
piece of insulation.
Sponsored: the copper wire to the positive pole of a power supply
25 KV; the side walls of aluminum to the negative pole and the
mass. The connections to the power supply and the mass range
made with copper wire, the more 'thin as possible. Measures:
dry good moisture vertical strips with a treatment
for 10 minutes in the microwave. Then paint it with a lacquer
transparent, so as to isolate them from ambient humidity.
The most effective and practical feeder has proved to be
a color monitor TV, from which is extracted the voltage
25 KV with a well insulated wire connected to the contact below
the suction cup of the CRT
QUOTE:It is a very effective application of the corona effect.
The electric field around the wire is very thin upper
high. The air molecules are ionized. The ions are
rejected by the wire and accelerated along the flat surface
aluminum. The shape and structure can certainly
be improved.https://www.youtube.com/channel/UCrgd8qJ7CE97PSaPJySR6wA
Materials. Strips of balsa 2 X 2 mm, glued with "Attack".
Walls covered with aluminum foil from the kitchen. Important:
turning up to 2 mm around the upper edge of the aluminum
to the top list. In high bare copper wire of 0.3 mm diameter,
taut. Provide ability to adjust the distance
between the wire and aluminum, for example by wrapping instead
directly on the vertical struts, around a small
piece of insulation.
Sponsored: the copper wire to the positive pole of a power supply
25 KV; the side walls of aluminum to the negative pole and the
mass. The connections to the power supply and the mass range
made with copper wire, the more 'thin as possible. Measures:
dry good moisture vertical strips with a treatment
for 10 minutes in the microwave. Then paint it with a lacquer
transparent, so as to isolate them from ambient humidity.
The most effective and practical feeder has proved to be
a color monitor TV, from which is extracted the voltage
25 KV with a well insulated wire connected to the contact below
the suction cup of the CRT
QUOTE:It is a very effective application of the corona effect.
The electric field around the wire is very thin upper
high. The air molecules are ionized. The ions are
rejected by the wire and accelerated along the flat surface
aluminum. The shape and structure can certainly
be improved.https://www.youtube.com/channel/UCrgd8qJ7CE97PSaPJySR6wA










