Uploaded December 2024 | Updated November 2026, 1 hour ago
The two 159-metre-long steel spans of HS2’s River Cole Viaducts have been completed near Coleshill in North Warwickshire, signalling further progress at the project’s Delta Junction.
The operation, delivered by HS2’s civils contractor Balfour Beatty VINVI (BBV), included lifting eight separate steel sections – weighing between 76 and 273 tonnes – onto six concrete piers and four abutments to form two parallel viaducts over the River Cole.
The pre-built sections were moved to the lifting position on the site using giant self-propelled modular transporters, before being lifted into place by a special crane.
This section of the HS2 route between London and the West Midlands is known as the Delta Junction - a triangular section of railway line made up of embankments, cuttings and a total of 13 viaducts taking high speed tracks over motorways, local roads, existing rail lines, rivers and floodplains.
Follow us on social media:
Twitter: twitter.com/HS2ltd
Instagram: instagram.com/hs2ltd
Facebook: facebook.com/HS2ltd
LinkedIn: linkedin.com/company/high-speed-two-hs2-ltd
0:00 Introduction
0:11 Where are we?
0:24 What is the purpose of the viaducts?
0:55 What has been achieved?
1:16 Pre-work
1:33 Installing the beams
2:00 Future works
2:15 A team effort
2:40 Final thoughts
3:09 Outro
#HS2 #Construction #engineering #update
If you have a question about HS2 or our works, please contact our HS2 Helpdesk team on 08081 434 434 or email hs2enquiries@hs2.org.uk.
The two 159-metre-long steel spans of HS2’s River Cole Viaducts have been completed near Coleshill in North Warwickshire, signalling further progress at the project’s Delta Junction.
The operation, delivered by HS2’s civils contractor Balfour Beatty VINVI (BBV), included lifting eight separate steel sections – weighing between 76 and 273 tonnes – onto six concrete piers and four abutments to form two parallel viaducts over the River Cole.
The pre-built sections were moved to the lifting position on the site using giant self-propelled modular transporters, before being lifted into place by a special crane.
This section of the HS2 route between London and the West Midlands is known as the Delta Junction - a triangular section of railway line made up of embankments, cuttings and a total of 13 viaducts taking high speed tracks over motorways, local roads, existing rail lines, rivers and floodplains.
Follow us on social media:
Twitter: twitter.com/HS2ltd
Instagram: instagram.com/hs2ltd
Facebook: facebook.com/HS2ltd
LinkedIn: linkedin.com/company/high-speed-two-hs2-ltd
0:00 Introduction
0:11 Where are we?
0:24 What is the purpose of the viaducts?
0:55 What has been achieved?
1:16 Pre-work
1:33 Installing the beams
2:00 Future works
2:15 A team effort
2:40 Final thoughts
3:09 Outro
#HS2 #Construction #engineering #update
If you have a question about HS2 or our works, please contact our HS2 Helpdesk team on 08081 434 434 or email hs2enquiries@hs2.org.uk.










