HS 2.8 differences compared to 300Tdi @BritannicaRestorations
HS 2.8 differences compared to 300Tdi  @BritannicaRestorations
Uploaded November 2026 | Updated November 2026, 3 hours ago
(Copied from Internet - pasted with text only format)

International HS 2.8 TGV Engine

Origins & Development

The HS 2.8 TGV was developed by International Engines (a joint venture between MWM and Ford, based in Brazil) as a direct evolution of the Land Rover 300 Tdi.
When Land Rover's UK engine production of the 300 Tdi ended, the engine line was sold to International, who held the rights to further develop it. Combustion research was carried out with AVL in Austria.
The engine was built in the same plant in Brazil that had been producing the 300 Tdi, and production continued until around 2010.

Key Improvements Over the 300 Tdi
The HS 2.8 is far more than just a bore-up. Major mechanical changes include:
• Forged steel crankshaft (the 300 Tdi used a cast crank)
• Fracture-fit big-end caps with bolted retention (vs. the 300 Tdi's design)
• Redesigned cylinder block and head with significantly improved cooling
• Laminated steel head gasket (replacing the composite type)
• Redesigned combustion chamber and pistons
• Improved rear crank oil seal to stop the notorious 300 Tdi oil seepage
• Bosch VP14 mechanical fuel injection pump with improved features (900 bar injection pressure)
• Variable Nozzle Turbo (VNT) on the TGV version — this is the "TGV" in the name, standing for Turbo à Géométrie Variable

Specifications
300 Tdi HS 2.8 TGV HS 2.8 WG

Displacement 2,495 cc 2,785 cc 2,785 cc

Bore × Stroke 90.47 × 97 mm 93.0 × 102.5 mm 93.0 × 102.5 mm

Compression Ratio 22.5:1 19.5:1 19.5:1

Power 111 bhp @ 4,000 rpm 135 bhp @ 3,800 rpm 132 bhp @ 3,800 rpm

Torque 195 lb·ft @ 1,800 rpm 277 lb·ft (375 Nm) @ 1,400 rpm 262 lb·ft (355 Nm) @ 1,600 rpm

Turbo Wastegate Variable Nozzle (VNT) Wastegate

Weight ~200 kg 208 kg 205 kg

The headline figure is the 375 Nm of torque available from just 1,400 rpm — a dramatic improvement over the 300 Tdi's 266 Nm at 1,800 rpm, giving the engine a far more tractable, lugging character.

Vehicles It Was Fitted To

Factory / near-factory applications:
• Ford Ranger (Brazil/South America) — the HS 2.8 was the factory diesel in the Ranger for the South American market, where it was known as the "Maxion" engine

• Land Rover Defender (90, 110, 130) — as an after-market conversion, widely fitted from the late 1990s onward

• Land Rover Discovery 1 (pre-2003) — same conversion route
• Range Rover Classic (1986–2002) — also via conversion kits

Other applications:
• Defender U4 military trucks
• Rally and overland competition vehicles
• Winch challenge / sled-pulling events (where the low-end torque is a major advantage)
• Various off-road and expedition builds worldwide

Fitment & Compatibility
The engine shares the same engine mounting points, bell housing pattern, and rear end as the 300 Tdi, making it a genuine drop-in replacement. The only differences in physical layout are the position of the air inlet to the inlet manifold/turbocharger and the turbo exhaust outlet, which are relocated. An alternative rear aluminium bell housing is available to fit the larger V8-model bell housings, so no adapter plates are needed.

Tuning Potential
The mechanical strength of the forged crank and fracture-fit rods means the engine handles significant power increases well. Common tuning stages include:
• Stage 1: Upgraded VNT turbo → ~380 Nm
• Stage 2: Wastegate actuator modification for ~20 psi boost → ~420 Nm
• Stage 3: Intercooler + 20 psi boost → ~510 Nm

Owners report the engine is robust and long-lived, often exceeding 500,000 km with basic maintenance, though the mechanical Bosch injection system means it's simpler to repair than a common-rail unit.

Subscriptions: britrest.com/subscriptions

patreon.com/britrest

paypal.me/britrest2018

Shop britrest.com/shop

Email britrest@britrest.com

This video is produced for entertainment purposes only and Britannica Restorations nor Michael Wesson and/or guests featured in this video shall not, in any way or measure, be held accountable or responsible for any damages related to attempted repairs as pictured in this video.
All opinions expressed by Michael Wesson and/or his guests are solely for entertainment purposes and shall not be interpreted as an official sponsorship of a product, brand, enterprise nor a judgement of quality and/or value of a product, brand, and/or enterprise.
Furthermore, Michael Wesson and/or Britannica Restorations are not responsible for the comments published by viewers of said video.
HS 2.8 differences compared to 300TdiEaster update 2026Happy St Georges day and memory stick update!What is in an old V8  A/C pump? (scrapping video)Guide pins and transmission fittedParking heater error code 07. Incompatible motherboard controller?20 million views!Preparing an R380 casing for rebuildingNovember 13 update,  Winter is here!Removing and fitting bearings LT230 input gear17 Sept update - the Tdci / Td4 engine is here!Upcoming job 1 Discovery 1
Britannica Restorations Ltd |

HS 2.8 differences compared to 300Tdi

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER