Uploaded January 2017 | Updated November 2026, 3 hours ago
Thanks to Fly Pro: flypro.com/en-xjaguar.htm
XJaguar Manual here: flypro.oss-cn-shenzhen.aliyuncs.com/app/XJaguar%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%B4%E6%98%8E%E4%B9%A620161027.pdf
Changing Video Transmitter Power:
If you would like to change the power level between 25mw and 600mw (Some 250mw), the method is to press the frequency modulation button, then power the board. Fast flashing 4 times means the power is changed from low to high, slow flashing 4 times means from high to low. Warning: It is best to do this with a 3s pack so you do not get as much peak voltage spikes which may fry your VTX. (thanks dmerc00)
Banggood Affiliate link: goo.gl/Qo48rX
My Instagram: instagram.com/hpi_guy
My Facebook: facebook.com/ThatHpiGuy
Donate to keep the channel going: goo.gl/pFQDBj
Thanks for watching.
Thanks to Fly Pro: flypro.com/en-xjaguar.htm
XJaguar Manual here: flypro.oss-cn-shenzhen.aliyuncs.com/app/XJaguar%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%B4%E6%98%8E%E4%B9%A620161027.pdf
Changing Video Transmitter Power:
If you would like to change the power level between 25mw and 600mw (Some 250mw), the method is to press the frequency modulation button, then power the board. Fast flashing 4 times means the power is changed from low to high, slow flashing 4 times means from high to low. Warning: It is best to do this with a 3s pack so you do not get as much peak voltage spikes which may fry your VTX. (thanks dmerc00)
Banggood Affiliate link: goo.gl/Qo48rX
My Instagram: instagram.com/hpi_guy
My Facebook: facebook.com/ThatHpiGuy
Donate to keep the channel going: goo.gl/pFQDBj
Thanks for watching.










