HPI GUY | Runcam Robin Budget FPV Camera @ThatHPIGUY
HPI GUY | Runcam Robin Budget FPV Camera  @ThatHPIGUY
Uploaded January 2019 | Updated November 2026, 3 hours ago
The new Runcam Robin, this is Runcams cheapest FPV cam to date It has a 700TVL CMOS 4:3 sensor with a latency of 6ms. It has extremely good wide dynamic range (better than that of the Runcam Eagle). Two lens options 1.8(M8) with 160FOV and 2.1(M8) and 145FOV. There is no UART control here just good old fashioned joystick control (no joystick in the box). Pal or NTSC switchable by shorting the osd and GND pin. And lastly no active OSD like voltage and so on, that won't bother most of us as we use the FC's OSD anyway. The release date is 14th Jan 2019.

NOTE: I think my OLD DVR footage was from 2014?.

UK an Europe can buy from here: quadcopters.co.uk/runcam-robin-fpv-camera

Buy from us quadcopters.co.uk

Buying from Banggood click my affiliate link and help me out: goo.gl/Qo48rX

My Instagram: instagram.com/hpi_guy

My Facebook: facebook.com/ThatHpiGuy

Donate to keep the channel going: goo.gl/pFQDBj

Thanks for watching.
HPI GUY | Runcam Robin Budget FPV CameraHPIGUY | Drones View - Cunards Three Queens 175th anniversary celebrations in MerseyHPI GUY | Runcam Split Review Part 1HPIGUY | Budget DL180 MiniQuad Build (Part1) What Parts - From Banggood.comHPIGUY | FatShark Dominator V2 DVR footage - QAV250 - Rate Mode -Life Update - Hospital time - 27-6-15 -HPIGUY | World Drone Prix - Day 4 - Freestyle Final Qualifying & Results - WDP2016HPIGUY | Turnigy Thrust Stand V2 - DYS & Thug Prop TestHPIGUY | Weston Park FPV Race Track PractiseHPIGUY | Easy frame swap (no tools)HPIGUY | CONNEX PROSIGHT - Pre Production test (Part 1)HPIGUY | World Drone Prix - Day 3 - Qualifying - Dubai 2016 - Tornado Xblades
ThatHPI GUY |

HPI GUY | Runcam Robin Budget FPV Camera

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER