Uploaded October 2026 | Updated November 2026, 32 minutes ago
Winterizing my 2006 Sea-Doo Speedster jet boat myself! In this video, I show how I used an air compressor, a drill-powered pump, and pink RV antifreeze to winterize the intercooler and protect it from freezing damage.
One of the most important parts of winterizing a supercharged Sea-Doo Speedster is making sure water doesn't remain trapped in the intercooler. If that water freezes, it can cause expensive damage.
I wanted to make the process simple, so I purchased a few inexpensive tools:
1. A quick-disconnect fitting to make reaching the tight hose connection easier.
2. A purpose-built air compressor adapter to blow out the remaining water.
3. A drill-powered transfer pump to push pink RV antifreeze through the intercooler.
After blowing out the water with compressed air, I connected the drill pump and pumped RV antifreeze through the system until pink antifreeze came out of the bottom of the boat. The whole process used approximately half a gallon of antifreeze.
The process was surprisingly easy! Having the right connectors made a big difference, especially when working in the cramped engine compartment.
This video focuses on protecting the intercooler and is not a complete winterization procedure for every system on the boat.
TOOLS AND SUPPLIES I USED (Affiliate links below):
Quick Disconnect:
https://link.amazon/B05OQssdM
Drill-Powered Pump with Hoses:
https://link.amazon/B055yDpxD
Air Compressor Adapter:
https://link.amazon/B0aDJKq0c
Pink RV Antifreeze (purchased locally):
https://link.amazon/B01Uyo0hk
If you're winterizing a Sea-Doo Speedster, Sea-Doo jet boat, or another supercharged Rotax marine engine, I hope this helps you understand one way to protect your intercooler during winter storage.
Always check the winterization instructions for your specific engine and model before proceeding.
#SeaDoo #SeaDooSpeedster #BoatWinterization #DIYBoatMaintenance #JetBoat
Winterizing my 2006 Sea-Doo Speedster jet boat myself! In this video, I show how I used an air compressor, a drill-powered pump, and pink RV antifreeze to winterize the intercooler and protect it from freezing damage.
One of the most important parts of winterizing a supercharged Sea-Doo Speedster is making sure water doesn't remain trapped in the intercooler. If that water freezes, it can cause expensive damage.
I wanted to make the process simple, so I purchased a few inexpensive tools:
1. A quick-disconnect fitting to make reaching the tight hose connection easier.
2. A purpose-built air compressor adapter to blow out the remaining water.
3. A drill-powered transfer pump to push pink RV antifreeze through the intercooler.
After blowing out the water with compressed air, I connected the drill pump and pumped RV antifreeze through the system until pink antifreeze came out of the bottom of the boat. The whole process used approximately half a gallon of antifreeze.
The process was surprisingly easy! Having the right connectors made a big difference, especially when working in the cramped engine compartment.
This video focuses on protecting the intercooler and is not a complete winterization procedure for every system on the boat.
TOOLS AND SUPPLIES I USED (Affiliate links below):
Quick Disconnect:
https://link.amazon/B05OQssdM
Drill-Powered Pump with Hoses:
https://link.amazon/B055yDpxD
Air Compressor Adapter:
https://link.amazon/B0aDJKq0c
Pink RV Antifreeze (purchased locally):
https://link.amazon/B01Uyo0hk
If you're winterizing a Sea-Doo Speedster, Sea-Doo jet boat, or another supercharged Rotax marine engine, I hope this helps you understand one way to protect your intercooler during winter storage.
Always check the winterization instructions for your specific engine and model before proceeding.
#SeaDoo #SeaDooSpeedster #BoatWinterization #DIYBoatMaintenance #JetBoat










