Uploaded September 2018 | Updated September 2026, 5 hours ago

---

Follow these easy steps to replace a High-Pressure Valve (Halkey Roberts Valve):

TO REPLACE A HIGH-PRESSURE VALVE YOU WILL NEED: PAPER TOWELS, WATER WITH DISH SOAP, AND AN H3 VALVE WRENCH
INFLATE THE PRODUCT.

SPRAY THE VALVE TO IDENTIFY ANY LEAKS
A LEAK IN THE VALVE WILL CREATE BUBBLES

BEFORE REPLACING THE VALVE, MAKE SURE IT’S PROPERLY CLOSED. IF IT’S SLIGHTLY OPEN IT CAN CREATE LEAKS AND TIGHTENING IT CAN FIX THE PROBLEM

AFTER CLOSING THE VALVE, SPRAY SOME SOAPY WATER ON AND AROUND IT TO IDENTIFY ANY POSSIBLE LEAKS

IF THE LEAK PERSISTS, THE VALVE NEEDS TO BE REPLACED. USE THE WRENCH TO OPEN THE VALVE AND REMOVE IT.

MAKE SURE THE NEW VALVE IS CLEAN, AND WITHOUT ANY GRASS, SEAWEED, OR DEBRIS

BEFORE PLACING THE NEW VALVE, MAKE SURE THE MOUNTING POINT IS CLEAN AND DRY

ALIGN THE MOUNTING POINT WITH THE HIGH-PRESSURE VALVE AND USE THE WRENCH TO SECURE IT

INFLATE THE PRODUCT TO CONFIRM THERE IS NO LONGER A LEAK

SPRAY THE VALVE WITH SOAPY WATER AND LOOK FOR ANY BUBBLES

PUT THE VALVE CAP ON, AND THE PRODUCT IS READY TO BE USED


---------------------------------------

Follow us on:
WEB ‣ aquaglide.com
INSTAGRAM ‣ instagram.com/aquaglide
FACEBOOK ‣ facebook.com/Aquaglide
PINTEREST ‣ pinterest.com/Aquaglide
TWITTER ‣ twitter.com/Aquaglide