Uploaded June 2026 | Updated September 2026, 1 week ago
A complete walkthrough of every button and control on your TenPoint VISION HD digital scope — power, settings and menu navigation, reticle colors, picture-in-picture, brightness, recording, color modes, the laser rangefinder, zoom, focus, and the diopter. Learn what each press does so you can navigate the scope with confidence.
0:00 Power button: on, off, and standby
0:22 Settings button: reticle colors and menu access
0:25 Navigating the menu: up, down, in, and back out
1:05 Right side: picture-in-picture and brightness
1:21 Recording: start and stop
1:32 Left side: full color and black-and-white modes
1:40 Laser rangefinder button
1:48 Zoom throw lever, focus knob, and diopter
Button guide: The top button is power — long press to turn the unit on or off, short press to enter or exit standby. The settings button cycles reticle colors with a short press and opens the menu with a long press. In the menu, the right button moves deeper, the left button backs you out, and the top and bottom buttons move up and down. The right-side controls handle picture-in-picture (long press to add or remove) and brightness (short press cycles levels one through five, then loops back). The rear button starts and stops recording. The left side switches between full color and black-and-white modes and activates the laser rangefinder. Adjust magnification with the zoom throw lever, sharpen the image with the front focus knob, and set the rear diopter so the screen display is clear for your eye.
View the full list of VISION scope setup videos: tenpointcrossbows.com/videos_category/vision-scope-operation
Shop the VISION HD scope: tenpointcrossbows.com/product/vision-hd-digital-rangefinding-crossbow-scope
Questions or warranty: tenpointcrossbows.com/contact-tenpoint
Follow Us On:
Facebook: facebook.com/TenPointCrossbows
Instagram: instagram.com/tenpointcrossbows
X (Twitter): twitter.com/TenPT_Crossbows
#TenPointCrossbows #VisionHD #CrossbowScope
A complete walkthrough of every button and control on your TenPoint VISION HD digital scope — power, settings and menu navigation, reticle colors, picture-in-picture, brightness, recording, color modes, the laser rangefinder, zoom, focus, and the diopter. Learn what each press does so you can navigate the scope with confidence.
0:00 Power button: on, off, and standby
0:22 Settings button: reticle colors and menu access
0:25 Navigating the menu: up, down, in, and back out
1:05 Right side: picture-in-picture and brightness
1:21 Recording: start and stop
1:32 Left side: full color and black-and-white modes
1:40 Laser rangefinder button
1:48 Zoom throw lever, focus knob, and diopter
Button guide: The top button is power — long press to turn the unit on or off, short press to enter or exit standby. The settings button cycles reticle colors with a short press and opens the menu with a long press. In the menu, the right button moves deeper, the left button backs you out, and the top and bottom buttons move up and down. The right-side controls handle picture-in-picture (long press to add or remove) and brightness (short press cycles levels one through five, then loops back). The rear button starts and stops recording. The left side switches between full color and black-and-white modes and activates the laser rangefinder. Adjust magnification with the zoom throw lever, sharpen the image with the front focus knob, and set the rear diopter so the screen display is clear for your eye.
View the full list of VISION scope setup videos: tenpointcrossbows.com/videos_category/vision-scope-operation
Shop the VISION HD scope: tenpointcrossbows.com/product/vision-hd-digital-rangefinding-crossbow-scope
Questions or warranty: tenpointcrossbows.com/contact-tenpoint
Follow Us On:
Facebook: facebook.com/TenPointCrossbows
Instagram: instagram.com/tenpointcrossbows
X (Twitter): twitter.com/TenPT_Crossbows
#TenPointCrossbows #VisionHD #CrossbowScope
