How To Use Round Beading Foot- Installation & Tutorial @StitchSWearShantiSingh
How To Use Round Beading Foot- Installation & Tutorial  @StitchSWearShantiSingh
Uploaded June 2020 | Updated November 2026, 2 days ago
#Beadfoot #LearnSewing #PresserfootTutorial #Stayhome #withme
How to Use the Beading Foot - Complete Guide Installation and Tutorial

Top Tip: take you foot with you when selecting beads until you are used to the sizes

32 Presser Foot Pack: amzn.to/3eIKDHp
Flower Presser Foot: amzn.to/386wrWl
Tailoring Kit Scale 1: amzn.to/3g3491A
Tailoring Kit scale 2: amzn.to/3eGq26E
TAiloring kit Scale 3: amzn.to/2BQneVN
VArdhman Thread: amzn.to/3i751Ed
Double Needle Set: amzn.to/3g7374M
Singer Sewing Machine 1408 Fashion maker: amzn.to/2CRC8Ml

Make sure to thread the beads through the foot before you put it on the machine, using the clip on bar.
You will need to select a wider zigzag stitch and a longer stitch length to secure the beads.
You can mark out a swirly floral pattern although you must avoid sewing beads over each other as this will not be possible with this foot.
If sewing around a curve go SLOWLY to get the best accuracy.
Then simply sew along your chosen stitch path and beautiful beads will be sewn into place automatically.
Selecting a clear filament will hide all stitching againt a multi coloured background, otherwise a matching coloured thread will work beautifully.
eads are a wonderful embellishment. They add dimension and texture and color in one fell swoop. But my-oh-my, putting them on can be a struggle and a half. Hand sewing in an option, if you have a few spare days. And machine sewing can be like trying to ride your bike over a field of BBs (no… I haven’t actually done that, but I know it would be tricky and very slippery). Luckily for me (and my bicycle), our friends at Janome have a cool set of presser feet made exactly for what we want to do: quickly attach strands of beads of various widths. Can a glittering gown for next year’s Oscars be far behind?!
The Janome Beading Feet come in two sizes. The larger one is for beads from 2.5mm to 4mm and the smaller one is for beads less than 2mm. They are available in both the 5mm-7mm presser foot size as well as the 9mm size. The 5mm – 7mm size comes as a set of two. The 9mm size is sold individually.

There’s a little channel at the front of the foot that precisely guides the bead strand under the foot. You feed the beads into the channel and the channel feeds them under the needle.

You should thread your machine with thread that best matches the beads first and the fabric second. For our samples, we purposefully chose white beads on a dark suede. We used white thread in both the top and bobbin and the stitches nearly disappear. We switched to black thread in both the top and bobbin when we tested a decorative strand with black rhinestone links against my navy fabric. Again, the thread is nearly invisible. If you have trouble matching, try going with a thread color to match your fabric in the bobbin and a clear monofilament thread in the top.

Set the stitch type to a simple zig zag. The thread tension should be set to automatic or in the 3 – 5 range. Stitch length should be approximately 1.5.

The width of your zig zag is the most critical. A width of approximately 2-3 is standard, but always test to be sure. Place the strand of beads on your project, place the project on your machine bed, and lower the foot over the bead strand so the channel is resting right over the beads. Using the handwheel, drop the needle to one side – it should just clear the bead. Still using the handwheel, turn it until the needle swings to the other side and make sure it just clears the bead on this opposite side. If it is too close or too far adjust your stitch width accordingly.


In the background of the photo above is a blurry white square we’d like to bring to your attention. Not because it’s blurry, but because that is a piece of tape. Our personal hint is to use an overlapped piece of tape to 1) secure the ends of your strand so the beads don’t slide off, and 2) to attach the end of the stand to your fabric.

Once you’re confident you have the swing of the needle set and the strand of beads is in place under the foot, you are ready to stitch. We like to hold the strand from both the back and the front. This does not mean you’re pulling on the beads; it’s more a stability thing, allowing you to better follow the drawn line.

And finally… all three strands sewn on. You can barely see the stitching… even quite close up. And, really, people better not have their faces that close to your beads!

NOTE: Do NOT back tack at the beginning or end. It looks messy. Instead, leave your thread tails long and hand tie knots to secure the thread at both ends of your strand of beads .

YT link : youtube.com/c/StitchSWearShantiSingh?sub_confirmation=1

Insta link : instagram.com/stitchandswear

fb page : facebook.com/The.Shanti.Singh

Linkedin: linkedin.com/company/stitchandswear

TikTok : @TheSewingMaster
How To Use Round Beading Foot- Installation & TutorialSewing Machine Maintenance - How Motor Works (Part 3)How to use Quilting or Edge Guide Bar - Installation & Tutorial 🔥⚡DIY Choli Drafting & Cutting Form Old Bangalore Silk SareeHow to use Blind Hem Presser Foot - Sewing MachineHappy Baking 🎂🎁🎂🎁DIY Utility Basket From Waste ClothDIY- Gharara Full Stitching TutorialHow to Stitch Self-Collar Kurti CompleteDIY Lehenga From Bangalore Silk Saree- Stitching TutorialBalloon Top Drafting & Cutting || नवरात्रि का चौथा दिन - कुष्मांडा देवीHow to Use Twin Needle - Easy way
Stitch And SWear |

How To Use Round Beading Foot- Installation & Tutorial

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER