Uploaded July 2025 | Updated September 2026, 9 hours ago
How to Use a Table Saw for Beginners The table saw is powerful — and a little intimidating if you’ve never used one. In this video, I’ll walk you through how to use it safely, make clean cuts, and avoid the most common beginner mistakes.
What you’ll learn:
🔹 Rip cuts, crosscuts, and bevel cuts
🔹 Key safety tips
🔹 Setup and practice drills that build confidence
📚 Learn to Use Your Router with Confidence
If you're new to woodworking or carpentry and want clear, beginner-friendly router training, check out my full Router Basics Course.
→ bit.ly/4u0LaLE
🌟 Join Our Free Woodworking & Carpentry Community
Want beginner tips, tool advice, and project support?
I run a free community where you can ask questions, get answers, and learn alongside others.
→ bit.ly/41ouySk
📋 Affiliate Links — Tools I Personally Use and Recommend
(If you use these links, I earn a small commission — at no extra cost to you. Thank you for supporting the channel!)
Adhesives
🔹 Starbond CA Glue (10% OFF) bit.ly/3h0wWUz
Get 10% off with code THA10 at checkout
Measuring & Marking Tools
🔹 Best Straight Edge Guide: amzn.to/3omQdX6
🔹 Combination Square: amzn.to/2X79Cgb
🔹 Speed Square: amzn.to/31fv02z
🔹 SOLA Carpenter’s Pencil: amzn.to/3GvTP4H
🔹 STANLEY FATMAX Tape Measure: amzn.to/4iBPqKM
Hand Tools
🔹 Estwing Hammer: amzn.to/2VVnHMr
🔹 Wood Chisel Set: amzn.to/2BjHH1H
🔹 Pry Bar Scraper (Improved Model): amzn.to/2oGhKXu
🔹 15" Utility Pry Bar: amzn.to/437utTq
🔹 Klein Tools 11-in-1 Screwdriver: amzn.to/3YSB8yp
Power Tools
🔹 Makita 7-1/4" Circular Saw: amzn.to/3GdBML9
🔹 Makita 6 1/2 Cordless Circular Saw: amzn.to/3REAnVW
🔹 Drill Combo Set: amzn.to/3lzu32c
🔹 Jigsaw: amzn.to/2AGpGua
🔹 5" Random Orbit Sander: amzn.to/3DASm6d
🔹 Best Beginner Compact Router: amzn.to/2nEjDUe
🔹 Advanced Plunge Router: amzn.to/3rvxXNo
Workspace Essentials
🔹 DEWALT Stanley Sawhorse (Set of 2): amzn.to/42S4CO6
🔹 IRWIN QUICK-GRIP Clamps: amzn.to/42GXNic
Safety Gear
🔹 3M 6503QL Respirator: amzn.to/3vVSGcA
🔹 P100 Filters (I use with the mask above): amzn.to/4jSmhvU
🔹 MicroClimate: bit.ly/microair3
---------------------------------------------------
Follow/Contact Me:
INSTAGRAM: instagram.com/traininghandsacademy
FACEBOOK : facebook.com/traininghandsacademy
EMAIL: josh@traininghandsacademy.com
--------------------------------------------------
0:00 Intro
0:17 Introduction to the Table Saw
0:45 Main Parts of the Saw
2:20 6 Key Safety Steps
4:27 Setting Up Your Saw
5:21 Practice: Rip Cuts
6:29 Practice: Crosscuts
7:12 Practice: Bevel Cuts
7:58 Practice: Using a Stop Block
8:41 Practice: Off-Cut Awareness
9:29 Understanding Kickback (and What Causes It)
10:47 4 Common Beginner Mistakes
11:42 A Few Words of Encouragement
12:12 Get More Help (Free Resources)
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
How to Use a Table Saw for Beginners The table saw is powerful — and a little intimidating if you’ve never used one. In this video, I’ll walk you through how to use it safely, make clean cuts, and avoid the most common beginner mistakes.
What you’ll learn:
🔹 Rip cuts, crosscuts, and bevel cuts
🔹 Key safety tips
🔹 Setup and practice drills that build confidence
📚 Learn to Use Your Router with Confidence
If you're new to woodworking or carpentry and want clear, beginner-friendly router training, check out my full Router Basics Course.
→ bit.ly/4u0LaLE
🌟 Join Our Free Woodworking & Carpentry Community
Want beginner tips, tool advice, and project support?
I run a free community where you can ask questions, get answers, and learn alongside others.
→ bit.ly/41ouySk
📋 Affiliate Links — Tools I Personally Use and Recommend
(If you use these links, I earn a small commission — at no extra cost to you. Thank you for supporting the channel!)
Adhesives
🔹 Starbond CA Glue (10% OFF) bit.ly/3h0wWUz
Get 10% off with code THA10 at checkout
Measuring & Marking Tools
🔹 Best Straight Edge Guide: amzn.to/3omQdX6
🔹 Combination Square: amzn.to/2X79Cgb
🔹 Speed Square: amzn.to/31fv02z
🔹 SOLA Carpenter’s Pencil: amzn.to/3GvTP4H
🔹 STANLEY FATMAX Tape Measure: amzn.to/4iBPqKM
Hand Tools
🔹 Estwing Hammer: amzn.to/2VVnHMr
🔹 Wood Chisel Set: amzn.to/2BjHH1H
🔹 Pry Bar Scraper (Improved Model): amzn.to/2oGhKXu
🔹 15" Utility Pry Bar: amzn.to/437utTq
🔹 Klein Tools 11-in-1 Screwdriver: amzn.to/3YSB8yp
Power Tools
🔹 Makita 7-1/4" Circular Saw: amzn.to/3GdBML9
🔹 Makita 6 1/2 Cordless Circular Saw: amzn.to/3REAnVW
🔹 Drill Combo Set: amzn.to/3lzu32c
🔹 Jigsaw: amzn.to/2AGpGua
🔹 5" Random Orbit Sander: amzn.to/3DASm6d
🔹 Best Beginner Compact Router: amzn.to/2nEjDUe
🔹 Advanced Plunge Router: amzn.to/3rvxXNo
Workspace Essentials
🔹 DEWALT Stanley Sawhorse (Set of 2): amzn.to/42S4CO6
🔹 IRWIN QUICK-GRIP Clamps: amzn.to/42GXNic
Safety Gear
🔹 3M 6503QL Respirator: amzn.to/3vVSGcA
🔹 P100 Filters (I use with the mask above): amzn.to/4jSmhvU
🔹 MicroClimate: bit.ly/microair3
---------------------------------------------------
Follow/Contact Me:
INSTAGRAM: instagram.com/traininghandsacademy
FACEBOOK : facebook.com/traininghandsacademy
EMAIL: josh@traininghandsacademy.com
--------------------------------------------------
0:00 Intro
0:17 Introduction to the Table Saw
0:45 Main Parts of the Saw
2:20 6 Key Safety Steps
4:27 Setting Up Your Saw
5:21 Practice: Rip Cuts
6:29 Practice: Crosscuts
7:12 Practice: Bevel Cuts
7:58 Practice: Using a Stop Block
8:41 Practice: Off-Cut Awareness
9:29 Understanding Kickback (and What Causes It)
10:47 4 Common Beginner Mistakes
11:42 A Few Words of Encouragement
12:12 Get More Help (Free Resources)
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
