Bosch DIY and Garden UK | How to tile a bathroom or kitchen wall: step-by-step guide @BoschDIYpowertoolsUK | Uploaded November 2022 | Updated October 2024, 2 hours ago.
Want to know how to #tilewalls in a bathroom or kitchen like a professional? We’ll show you how.
Whether you have moved home or just want to revitalise some outdated decor, re-tiling can be a powerful skill to have in your DIY arsenal. Although daunting at first, there really is no need to call for outside help. We tell you everything you need to know.
00:00 How to tile walls
00:03 Mark out the area
00:25 Apply primer
00:40 Mount a tile stop (optional)
00:46 Apply the mortar
01:04 Draw grooves
01:12 Mount the tiles
01:33 Finishing touches
-------------------------------------------------------------------------------------------------------------------------------------------------
*How to #tileawall: get started on your DIY project*
You will need the following tools and equipment before tiling a wall:
*Tools:*
• Cross-line laser
*Utilities:*
• Bucket
• Tile trowel
• Notched trowel
• Scraper
*Materials:*
• Primer
• Paintbrush
• Mortar
• Tile spacer
• Tile wedge
*How to tile walls in a kitchen or bathroom: a step-by-step guide*
Learn how to tile a shower wall, a kitchen splashback or an entire room with our step-by-step guide:
*1. Mark out the area* – Prepare the work area by laying a drop cloth and covering light switches and plugs. Next, prepare the wall by cleaning thoroughly and using filler to plug any holes. Use a cross-line laser to help you mark a straight horizontal line where you want the first row of tiles to go.
*2. Apply primer* – Use a primer that is suitable for your base surface and follow the manufacturer’s instructions for application and the number of coats. Wait until completely dry before proceeding.
*3. Mount a tile stop (optional)* – If you are using large or heavy tiles, it is advisable to mount a horizontal stop to prevent them from slipping before the mortar has set. Screw a temporary board to the wall below the lower tile mark.
*4. Apply the mortar* – Mix and prepare the mortar to the correct consistency. Use a tile trowel to apply the mortar from the bottom and work upwards, starting with the first row only.
Tip: Mortar should be roughly the consistency and texture of smooth peanut butter.
*5. Draw grooves* – Use a notched trowel to draw grooves in the mortar while also making sure it is evenly distributed. Comb through with an angle of about 60 degrees.
Tip: Check the instructions on the mortar for the most suitable notch spacing.
*6. Mount the tiles* – Line up your first tile and lightly push it into the mortar. Use a scraper to create a little distance between the wall and tile. Place the second tile flush with the first and nudge to create a little space. Fit tile spacers for identical spacing. Cut the final tile to size, if necessary.
Before starting the next row, remove any excess mortar. Then repeat steps 4-6.
*7. Finishing touches* – Remove spacers immediately after tiling and scrape out any excess mortar. Once dried, you can apply the grout.
Now you know how to tile a wall DIY-style in seven simple steps. How did you get on? Let us know in the comments.
Want to learn more? Read the *full set of instructions* on our website: bosch-diy.com/gb/en/all-about-diy/putting-up-tiles
Find all *products* here:
Cross-line laser bosch-diy.com/gb/en/measuring-tools/levelling-devices/cross-line-lasers
Interested in more DIY projects? *Check out our DIY & Garden Magazine* for a full collection of home project ideas and trends: bosch-diy.com/gb/en/all-about-diy
Like our videos and want to keep updated with new content? *Subscribe to our channel:* youtube.com/@BoschDIYpowertoolsUK/featured
We regularly update our social channels with all the latest DIY tips and trends for home and garden projects. Get inspired and *follow us today:*
*Facebook:* facebook.com/BoschDIYpowertoolsUK
*Instagram:* instagram.com/boschdiyandgarden/?hl=en
*Pinterest:* pinterest.co.uk/BoschDIYandGardenUK
Want to know how to #tilewalls in a bathroom or kitchen like a professional? We’ll show you how.
Whether you have moved home or just want to revitalise some outdated decor, re-tiling can be a powerful skill to have in your DIY arsenal. Although daunting at first, there really is no need to call for outside help. We tell you everything you need to know.
00:00 How to tile walls
00:03 Mark out the area
00:25 Apply primer
00:40 Mount a tile stop (optional)
00:46 Apply the mortar
01:04 Draw grooves
01:12 Mount the tiles
01:33 Finishing touches
-------------------------------------------------------------------------------------------------------------------------------------------------
*How to #tileawall: get started on your DIY project*
You will need the following tools and equipment before tiling a wall:
*Tools:*
• Cross-line laser
*Utilities:*
• Bucket
• Tile trowel
• Notched trowel
• Scraper
*Materials:*
• Primer
• Paintbrush
• Mortar
• Tile spacer
• Tile wedge
*How to tile walls in a kitchen or bathroom: a step-by-step guide*
Learn how to tile a shower wall, a kitchen splashback or an entire room with our step-by-step guide:
*1. Mark out the area* – Prepare the work area by laying a drop cloth and covering light switches and plugs. Next, prepare the wall by cleaning thoroughly and using filler to plug any holes. Use a cross-line laser to help you mark a straight horizontal line where you want the first row of tiles to go.
*2. Apply primer* – Use a primer that is suitable for your base surface and follow the manufacturer’s instructions for application and the number of coats. Wait until completely dry before proceeding.
*3. Mount a tile stop (optional)* – If you are using large or heavy tiles, it is advisable to mount a horizontal stop to prevent them from slipping before the mortar has set. Screw a temporary board to the wall below the lower tile mark.
*4. Apply the mortar* – Mix and prepare the mortar to the correct consistency. Use a tile trowel to apply the mortar from the bottom and work upwards, starting with the first row only.
Tip: Mortar should be roughly the consistency and texture of smooth peanut butter.
*5. Draw grooves* – Use a notched trowel to draw grooves in the mortar while also making sure it is evenly distributed. Comb through with an angle of about 60 degrees.
Tip: Check the instructions on the mortar for the most suitable notch spacing.
*6. Mount the tiles* – Line up your first tile and lightly push it into the mortar. Use a scraper to create a little distance between the wall and tile. Place the second tile flush with the first and nudge to create a little space. Fit tile spacers for identical spacing. Cut the final tile to size, if necessary.
Before starting the next row, remove any excess mortar. Then repeat steps 4-6.
*7. Finishing touches* – Remove spacers immediately after tiling and scrape out any excess mortar. Once dried, you can apply the grout.
Now you know how to tile a wall DIY-style in seven simple steps. How did you get on? Let us know in the comments.
Want to learn more? Read the *full set of instructions* on our website: bosch-diy.com/gb/en/all-about-diy/putting-up-tiles
Find all *products* here:
Cross-line laser bosch-diy.com/gb/en/measuring-tools/levelling-devices/cross-line-lasers
Interested in more DIY projects? *Check out our DIY & Garden Magazine* for a full collection of home project ideas and trends: bosch-diy.com/gb/en/all-about-diy
Like our videos and want to keep updated with new content? *Subscribe to our channel:* youtube.com/@BoschDIYpowertoolsUK/featured
We regularly update our social channels with all the latest DIY tips and trends for home and garden projects. Get inspired and *follow us today:*
*Facebook:* facebook.com/BoschDIYpowertoolsUK
*Instagram:* instagram.com/boschdiyandgarden/?hl=en
*Pinterest:* pinterest.co.uk/BoschDIYandGardenUK
