How to test if a HDD is SMR using FIO @ElectronicsWizardry
How to test if a HDD is SMR using FIO  @ElectronicsWizardry
Uploaded June 2020 | Updated November 2026, 3 hours ago
I show how to test if a drive is SMR using FIO in Linux. SMR drives can be much slower in some workloads and are often not labeled well, so this is easy to use method that will easily show if a drive is smr or not. This test can run on any systems with FIO, and I use a Fedora 32 install as a example. It can also run from a live disk.


Here is the command I used to test the drives


sudo fio —name=smrtest —direct=1 —readwrite=randwrite —bs=1M —iodepth=4 —filename=/dev/sdb
How to test if a HDD is SMR using FIOGetting Data Off a Failed Pre-Built NASCrossfire of HD 2400 Pro, one of the worst Crossfire setupsMovespeed Ray x20 review, taking a look at a 20gbit USB SSDUpgrading My Home Server to Dual Xeon E5 2680 v2sHow does Proxmox use P and E cores?Taking a look at storage at NAB 2026Proxmox 7.1 Guide: From blank system to HypervisorHow to setup a Linux Fileserver with Snapraid and MergerfsGetting the Most of Memory in Proxmox: Optimizing VMs, Swap and Memory CompressionHow to create users and set permissions in ProxmoxSetting up a NAS for Offsite backups: Tips, Tricks and more
ElectronicsWizardry |

How to test if a HDD is SMR using FIO

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER