Uploaded August 2014 | Updated November 2026, 6 hours ago
I always loose this remote for my PC's lighting, so I decided to come up with a way to store it. I plan on painting the front with black spraypaint to match the rest of the desktop.
I always loose this remote for my PC's lighting, so I decided to come up with a way to store it. I plan on painting the front with black spraypaint to match the rest of the desktop.

![Why Your Dell Laptop Wont Charge After Replacing DC Jack But Original Jack Works [READ DESCRIPTION]
Serious design flaw with these DC jacks. When the inner plastic of the jack breaks, the +19v pins and the 3.3v data pin touch, it sends +19v to the chip inside the laptop that reads the charger.
This [presumably] damages the chip or its supporting circuitry, and it can no longer talk to the charger to check what wattage it is.
But for reasons I have yet to figure out due to dell not publishing motherboard schematics, when you wiggle your plug around, itll send a pulse to the chip again like it did when it broke, but this pulse seems to convince the chip to begin working again. This is what happened when I touch the two pins with my tweezers on the exposed adapter I have.
But if the battery dies or an undetermined period of time passes, the chip stops talking to the charger again.
When you replace the DC jack, the data (3.3v) and power pins (19v) no longer touch when you wiggle the connector, so the chip never gets jump started and the laptop will never recognize the charger.
This is an absolutely terrible design flaw, and Ive seen HPs do it as well, but they actually stop powering on entirely instead of running in limp home mode like dell does.
Fixing this involves motherboard repair or replacement. Model of laptop in the video is an Inspiron 5570. I had one last week at the shop which was the 17in version, same exact issue. Why Your Dell Laptop Wont Charge After Replacing DC Jack But Original Jack Works [READ DESCRIPTION]](https://i.ytimg.com/vi/E1QD9AHdG7k/mqdefault.jpg)








