Uploaded November 2016 | Updated November 2026, 2 days ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This demonstration shows an emergency survival fire-starting technique using a removable cell phone battery and a strip of foil-backed paper. When no lighter or matches are available, bridging the positive and negative terminals of a battery with thin foil creates electrical resistance that rapidly heats the paper backing past its ignition point.
Materials Needed
Removable lithium-ion cell phone battery
Foil-lined paper (such as cigarette liner foil or chocolate bar wrapper foil)
How It Works
1. Tear or cut a long, thin strip of foil-backed paper, folding or shaping the two ends so they make clean contact with the battery terminals. Because smartphone batteries include an internal overcurrent protection circuit, keeping the strip long and thin increases resistance enough to generate heat without tripping the cutoff switch.
2. Loosely crumple the middle of the paper strip so it catches a flame and shields the ember from blowing out right away.
3. Touch the two foil ends directly across the positive (+) and negative (-) terminals on the battery to complete the circuit until the paper smokes and ignites, then transfer it immediately to dry tinder. (A similar method works with a standard AA battery and a foil gum wrapper cut into an hourglass shape with a narrow bridge in the center.)
Because lithium-ion batteries can overheat, vent toxic gases, or rupture if shorted improperly—and the foil strip reaches ignition temperature in seconds—only test this outdoors in a clear, fire-safe area with water nearby, use gloves or insulated tools to hold the foil, and never short-circuit damaged, swollen, or punctured batteries. Strictly for emergency survival education.
Music: YouTube Audio Library
Tracks: Foundation, Disco_Ultralounge
Artists: Vibe Tracks; Kevin MacLeod
Disco Ultralounge by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/). Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100602 Artist: incompetech.com
#SurvivalSkills #FireStarting #EmergencyPreparedness
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This demonstration shows an emergency survival fire-starting technique using a removable cell phone battery and a strip of foil-backed paper. When no lighter or matches are available, bridging the positive and negative terminals of a battery with thin foil creates electrical resistance that rapidly heats the paper backing past its ignition point.
Materials Needed
Removable lithium-ion cell phone battery
Foil-lined paper (such as cigarette liner foil or chocolate bar wrapper foil)
How It Works
1. Tear or cut a long, thin strip of foil-backed paper, folding or shaping the two ends so they make clean contact with the battery terminals. Because smartphone batteries include an internal overcurrent protection circuit, keeping the strip long and thin increases resistance enough to generate heat without tripping the cutoff switch.
2. Loosely crumple the middle of the paper strip so it catches a flame and shields the ember from blowing out right away.
3. Touch the two foil ends directly across the positive (+) and negative (-) terminals on the battery to complete the circuit until the paper smokes and ignites, then transfer it immediately to dry tinder. (A similar method works with a standard AA battery and a foil gum wrapper cut into an hourglass shape with a narrow bridge in the center.)
Because lithium-ion batteries can overheat, vent toxic gases, or rupture if shorted improperly—and the foil strip reaches ignition temperature in seconds—only test this outdoors in a clear, fire-safe area with water nearby, use gloves or insulated tools to hold the foil, and never short-circuit damaged, swollen, or punctured batteries. Strictly for emergency survival education.
Music: YouTube Audio Library
Tracks: Foundation, Disco_Ultralounge
Artists: Vibe Tracks; Kevin MacLeod
Disco Ultralounge by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/). Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100602 Artist: incompetech.com
#SurvivalSkills #FireStarting #EmergencyPreparedness
©Von Malegowski. All Rights Reserved.










