Uploaded August 2020 | Updated November 2026, 2 days ago
#Buttonhole #ButtonSewing #SewingLesson @StitchSWearShantiSingh
The button hole foot is a sewing machine foot which simply clips onto the machine. Remove your current presser foot, and then clip the buttonhole foot on. You can make a buttonhole with a 1 step or 4 step buttonhole setting on your machine. The 4 step buttonhole setting your your sewing machine should look something like the image below.
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Art Work Deepika Padukone Portrait: bit.ly/300x5Tf
Must Have Products:
32 Presser Foot Pack: amzn.to/3eIKDHp
Flower Presser Foot: amzn.to/386wrWl
Tailoring Kit Scale 1: amzn.to/3g3491A
Tailoring Kit scale 2: amzn.to/3eGq26E
TAiloring kit Scale 3: amzn.to/2BQneVN
VArdhman Thread: amzn.to/3i751Ed
Double Needle Set: amzn.to/3g7374M
Buttonhole setting on your sewing machine
First you need to decide how big you need your buttonhole to be for the button to fit through. To do that, place your button in the buttonhole presser foot (or if it is too big, next to the attachment) at the end which is closest to you. Note the markings on the side of the attachment are there to help you remember the size of your button. You don't have to only make buttonholes at a marked level. Don't forget that this is the standard way to measure for a flat button. Raised buttons marry need more room, so it's always best to practice on a scrap of fabric first to make sure the button will go through.
How to sew buttons and buttonholes
Set the attachment at the length of your button and select stitch 'a/c'. This will sew a side to side. You need this to be anchored in well or when you open your buttonhole it could break and the material could rip. So I would sew at least 6 times.
Next, select stitch 'd'. This sews a right sided zigzag stitch and brings you to the front of your buttonhole. Note that your stitch length will effect your zigzag. You will rarely find a satin stitch used on a buttonhole, but I would recommend a short stitch length.
Sewing 4 step button holes
Step 3 is a repeat of step 1, but this time you are just at the other end of the buttonhole. Finally, select stitch 'b'. This is a left sided zigzag that will bring you back to where you started. I prefer to always sew a buttonhole twice over so I know it can withstand heavy usage. So once you have sewn it twice it should look like the image below.
Using zig zag stitch to sew buttonholes
The only thing you have left to do is open up your buttonhole. Ideally using a seam ripper (or scissors) slide down the centre of the material being careful not to cut the end stitches.
Your buttonhole is now complete, so let's move on to the button itself. To use the button attaching foot you must either lower or cover your feed dogs depending on your machine type. This is because you need to stitch on the spot so you don't want your machine pulling your fabric away from you. If you have covered your feed dogs, don't forget to pull your bobbin thread up through the opening in the cover.
Sewing buttons onto garments with your sewing machine
Select a zigzag stitch then by hand, lower and raise the needle until you have the stitch width needed for the needle to go into each buttonhole. You may need to jiggle the angle of the button under the foot to get it lining up perfectly.
Sewing buttons on with your sewing machine
Then start sewing. The amount of times you go through the button will depend on its use, but I would recommend again, a minimum 6 times into each button hole. If your button has to go through a thick fabric or lots of layers you may wish for your button to be freer from the fabric so that once it is pulled through, it sits comfortably on top. You are more likely to be able to do this by machine if you can lower your feed dogs as often the cover for feed dogs takes up too much space, so a spacing item wont fit.
If you do have plenty of space under the button and presser foot, simply place something narrower than the width of the holes under the button between the holes (eg. A chopstick), to raise the button away from the fabric as you stitch. To reduce the chance of it slipping, lower the needle by hand for the first couple of stitches. I prefer to reinforce this by looping thread around the thread under the button a few times and tying a knot by hand immediately after removing the item, before it has time to slacken.
Stitching Hooks and EyesEye and Hook
Stitch both the hook and the eye through the holes at the end, in the same method as used for the basic button sewing.
You may wish to secure the opposite end of the hook or eye with a small piece of tape to keep the correct place while stitching.
Your button is now ready for use!
#Buttonhole #ButtonSewing #SewingLesson @StitchSWearShantiSingh
The button hole foot is a sewing machine foot which simply clips onto the machine. Remove your current presser foot, and then clip the buttonhole foot on. You can make a buttonhole with a 1 step or 4 step buttonhole setting on your machine. The 4 step buttonhole setting your your sewing machine should look something like the image below.
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Art Work Deepika Padukone Portrait: bit.ly/300x5Tf
Must Have Products:
32 Presser Foot Pack: amzn.to/3eIKDHp
Flower Presser Foot: amzn.to/386wrWl
Tailoring Kit Scale 1: amzn.to/3g3491A
Tailoring Kit scale 2: amzn.to/3eGq26E
TAiloring kit Scale 3: amzn.to/2BQneVN
VArdhman Thread: amzn.to/3i751Ed
Double Needle Set: amzn.to/3g7374M
Buttonhole setting on your sewing machine
First you need to decide how big you need your buttonhole to be for the button to fit through. To do that, place your button in the buttonhole presser foot (or if it is too big, next to the attachment) at the end which is closest to you. Note the markings on the side of the attachment are there to help you remember the size of your button. You don't have to only make buttonholes at a marked level. Don't forget that this is the standard way to measure for a flat button. Raised buttons marry need more room, so it's always best to practice on a scrap of fabric first to make sure the button will go through.
How to sew buttons and buttonholes
Set the attachment at the length of your button and select stitch 'a/c'. This will sew a side to side. You need this to be anchored in well or when you open your buttonhole it could break and the material could rip. So I would sew at least 6 times.
Next, select stitch 'd'. This sews a right sided zigzag stitch and brings you to the front of your buttonhole. Note that your stitch length will effect your zigzag. You will rarely find a satin stitch used on a buttonhole, but I would recommend a short stitch length.
Sewing 4 step button holes
Step 3 is a repeat of step 1, but this time you are just at the other end of the buttonhole. Finally, select stitch 'b'. This is a left sided zigzag that will bring you back to where you started. I prefer to always sew a buttonhole twice over so I know it can withstand heavy usage. So once you have sewn it twice it should look like the image below.
Using zig zag stitch to sew buttonholes
The only thing you have left to do is open up your buttonhole. Ideally using a seam ripper (or scissors) slide down the centre of the material being careful not to cut the end stitches.
Your buttonhole is now complete, so let's move on to the button itself. To use the button attaching foot you must either lower or cover your feed dogs depending on your machine type. This is because you need to stitch on the spot so you don't want your machine pulling your fabric away from you. If you have covered your feed dogs, don't forget to pull your bobbin thread up through the opening in the cover.
Sewing buttons onto garments with your sewing machine
Select a zigzag stitch then by hand, lower and raise the needle until you have the stitch width needed for the needle to go into each buttonhole. You may need to jiggle the angle of the button under the foot to get it lining up perfectly.
Sewing buttons on with your sewing machine
Then start sewing. The amount of times you go through the button will depend on its use, but I would recommend again, a minimum 6 times into each button hole. If your button has to go through a thick fabric or lots of layers you may wish for your button to be freer from the fabric so that once it is pulled through, it sits comfortably on top. You are more likely to be able to do this by machine if you can lower your feed dogs as often the cover for feed dogs takes up too much space, so a spacing item wont fit.
If you do have plenty of space under the button and presser foot, simply place something narrower than the width of the holes under the button between the holes (eg. A chopstick), to raise the button away from the fabric as you stitch. To reduce the chance of it slipping, lower the needle by hand for the first couple of stitches. I prefer to reinforce this by looping thread around the thread under the button a few times and tying a knot by hand immediately after removing the item, before it has time to slacken.
Stitching Hooks and EyesEye and Hook
Stitch both the hook and the eye through the holes at the end, in the same method as used for the basic button sewing.
You may wish to secure the opposite end of the hook or eye with a small piece of tape to keep the correct place while stitching.
Your button is now ready for use!










