Uploaded April 2025 | Updated November 2026, 2 hours ago
You like to start multicolor 3D printing? So check out my codes for the ANYCUBIC KOBRA S1 bundles.
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO
code: DEKOBRAS1 549EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-COMBO-3D-Drucker-10002169.html
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO PLUS 5KG PLA FILAMENT
code: DE02241 599EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-Combo-5kg-HS-PLA-Combo-2-10002503.html
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO PLUS 8KG PANTONE PLA FILAMENT
code: S1C8KG 599EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-Combo-8kg-Pantone-PLA-10002170.html
ANYCUBIC KOBRA S1 COMBO WITH 2 ACE PRO PLUS UNITS
code: ANYKS1CA 749eur
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/Anycubic-Kobra-S1-3D-Drucker-und-2-Ace-Pro-10002190.html
You like to support me:
patreon.com/realmartingrey
My european merch shop: martingrey.myspreadshop.de
My US merch shop: martingrey.myspreadshop.com
If you like my videos and want to give support:
patreon.com/realmartingrey
Check also my stuff on:
Instagram: / etoe.designs
Facebook: / etoe.designs
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
If you are interested in bike design, please visit also the website etoe.de
▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬
0:00 - Intro
0:20 - unpacking the 3D printer
0:39 - connecting the ACE pro with the Anycubic Kobra S1
1:33 - setup the Anycubic Kobra S1
2:31 - installing the Anycubic Slicer Next
3:00 - adding the printer to the Anycubic Slicer Next
5:23 - setup the print file for multicolor printing
6:53 - printing with the Anycubic Kobra S1
7:05 - adjusting the Z-offset
7:49 - summary
You like to start multicolor 3D printing? So check out my codes for the ANYCUBIC KOBRA S1 bundles.
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO
code: DEKOBRAS1 549EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-COMBO-3D-Drucker-10002169.html
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO PLUS 5KG PLA FILAMENT
code: DE02241 599EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-Combo-5kg-HS-PLA-Combo-2-10002503.html
ANYCUBIC KOBRA S1 COMBO WITH ACE PRO PLUS 8KG PANTONE PLA FILAMENT
code: S1C8KG 599EUR
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/ANYCUBIC-KOBRA-S1-Combo-8kg-Pantone-PLA-10002170.html
ANYCUBIC KOBRA S1 COMBO WITH 2 ACE PRO PLUS UNITS
code: ANYKS1CA 749eur
affiliate.geekbuying.com/deeplink.php?affid=4133&url=https://de.geekbuying.com/item/Anycubic-Kobra-S1-3D-Drucker-und-2-Ace-Pro-10002190.html
You like to support me:
patreon.com/realmartingrey
My european merch shop: martingrey.myspreadshop.de
My US merch shop: martingrey.myspreadshop.com
If you like my videos and want to give support:
patreon.com/realmartingrey
Check also my stuff on:
Instagram: / etoe.designs
Facebook: / etoe.designs
disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. You have no extra cost using these links. You help to support the channel and allows me to continue to make videos like this. Thank you for watching!
If you are interested in bike design, please visit also the website etoe.de
▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬
0:00 - Intro
0:20 - unpacking the 3D printer
0:39 - connecting the ACE pro with the Anycubic Kobra S1
1:33 - setup the Anycubic Kobra S1
2:31 - installing the Anycubic Slicer Next
3:00 - adding the printer to the Anycubic Slicer Next
5:23 - setup the print file for multicolor printing
6:53 - printing with the Anycubic Kobra S1
7:05 - adjusting the Z-offset
7:49 - summary










