Uploaded November 2026 | Updated November 2026, 3 hours ago
How to Set Up a Megger MFT for CPC Continuity Testing
Before carrying out a continuity test on a circuit protective conductor (CPC), it's essential to set up your multifunction tester correctly. But are you remembering to zero your test leads?
In this video, Gary and Joe demonstrate how to prepare a **Megger Multifunction Tester (MFT)** for low-resistance continuity testing.
We'll cover:
⚡ Connecting your test leads to the correct L1 and L2 terminals.
⚡ Selecting the low-ohms resistance setting on your Megger MFT.
⚡ Why the tester continuously measures resistance.
⚡ How to correctly connect your test leads together for reliable results.
⚡ Why using the fixed jaws of your crocodile clips provides better contact.
⚡ How to zero (null) your test leads to remove their resistance from your measurements.
⚡ What it means when your tester displays a negative resistance reading.
⚡ How to confirm your tester is correctly set up and ready for CPC continuity testing.
Did you know? Your test leads can introduce additional resistance into your measurements. In our demonstration, the leads initially measure approximately 0.14 Ω for us before being zeroed.
Getting this simple procedure right is essential for obtaining accurate continuity test results.
Whether you're an electrical apprentice, studying for your AM2 assessment or an experienced electrician brushing up on your testing skills, this practical demonstration will help you get your Megger MFT ready for testing.
🔔 Subscribe for more free electrical training videos youtube.com/c/GSHElectrical?sub_confirmation=1
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Introduction – Setting up the Megger MFT
00:10 -Connecting the test leads to L1 and L2
00:22 - Selecting the low-ohms setting
00:36 - Understanding continuous resistance measurement
00:48 - Correctly connecting the test leads together
01:05 - Understanding negative resistance readings
01:20 - Zeroing the test leads
01:34 - Ready to carry out the CPC continuity test
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK facebook.com/gshelectrical
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe
#GSHElectrical #Electricaltrainingvideos #electricalwiring #electricaltesting #megger
How to Set Up a Megger MFT for CPC Continuity Testing
Before carrying out a continuity test on a circuit protective conductor (CPC), it's essential to set up your multifunction tester correctly. But are you remembering to zero your test leads?
In this video, Gary and Joe demonstrate how to prepare a **Megger Multifunction Tester (MFT)** for low-resistance continuity testing.
We'll cover:
⚡ Connecting your test leads to the correct L1 and L2 terminals.
⚡ Selecting the low-ohms resistance setting on your Megger MFT.
⚡ Why the tester continuously measures resistance.
⚡ How to correctly connect your test leads together for reliable results.
⚡ Why using the fixed jaws of your crocodile clips provides better contact.
⚡ How to zero (null) your test leads to remove their resistance from your measurements.
⚡ What it means when your tester displays a negative resistance reading.
⚡ How to confirm your tester is correctly set up and ready for CPC continuity testing.
Did you know? Your test leads can introduce additional resistance into your measurements. In our demonstration, the leads initially measure approximately 0.14 Ω for us before being zeroed.
Getting this simple procedure right is essential for obtaining accurate continuity test results.
Whether you're an electrical apprentice, studying for your AM2 assessment or an experienced electrician brushing up on your testing skills, this practical demonstration will help you get your Megger MFT ready for testing.
🔔 Subscribe for more free electrical training videos youtube.com/c/GSHElectrical?sub_confirmation=1
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Introduction – Setting up the Megger MFT
00:10 -Connecting the test leads to L1 and L2
00:22 - Selecting the low-ohms setting
00:36 - Understanding continuous resistance measurement
00:48 - Correctly connecting the test leads together
01:05 - Understanding negative resistance readings
01:20 - Zeroing the test leads
01:34 - Ready to carry out the CPC continuity test
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK facebook.com/gshelectrical
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe
#GSHElectrical #Electricaltrainingvideos #electricalwiring #electricaltesting #megger





