Uploaded December 2020 | Updated September 2026, 6 hours ago
This is your video instruction on how to set multiple WIDI devices as a group connection in iOS WIDI App (version 1.2.11 or higher). For more information, please read this blog: cme-pro.com/public-beta-test-ios-widi-app
Read this transcript that describes the video content step by step!
Step 0: Ensure you use iOS WIDI App (version 1.2.11 or higher).
Step 1: Please upgrade your WIDI devices to the latest firmware (first fw version for group connection is v0098). If you have multiple units, remember to not power up multiple WIDI devices at once. As they will pair 1-to-1 automatically, and that will make it impossible for the iOS app to pair with your WIDI devices.
Step 2: Set your WIDI to the peripheral role and give it a new name.
* Select "Force peripheral" in BLE role section, the setting will be saved into your WIDI automatically.
* Click the device name in Status section to rename your device. You will need to reboot your WIDI device to see the changes.
Step 3: Repeat above steps to set all WIDIs that you want to add in a group.
Step 4: After you set all WIDI devices in peripheral role, please switch them on.
Step 5: Click "Groups" menu and click "Add a new group".
Step 6: Enter your name for the group.
Step 7: Drag & drop your WIDI devices to the central and peripheral places.
Step 8: Click "Download group", the group setting will be saved in all WIDI devices. Next, all units will be rebooted automatically.
Step 9: Wait for few seconds, all WIDI devices that you set as the group will connect to each other.
Step 10: All settings will be remembered even when you switch your WIDI devices off. Next time when you switch them on again, they will connect to each other in the same group.|
* Note: If you want to forget the group connection setting, please go to each WIDI Status page and click "Reset default connections".
Check out our product information and latest updates on cme-pro.com
This is your video instruction on how to set multiple WIDI devices as a group connection in iOS WIDI App (version 1.2.11 or higher). For more information, please read this blog: cme-pro.com/public-beta-test-ios-widi-app
Read this transcript that describes the video content step by step!
Step 0: Ensure you use iOS WIDI App (version 1.2.11 or higher).
Step 1: Please upgrade your WIDI devices to the latest firmware (first fw version for group connection is v0098). If you have multiple units, remember to not power up multiple WIDI devices at once. As they will pair 1-to-1 automatically, and that will make it impossible for the iOS app to pair with your WIDI devices.
Step 2: Set your WIDI to the peripheral role and give it a new name.
* Select "Force peripheral" in BLE role section, the setting will be saved into your WIDI automatically.
* Click the device name in Status section to rename your device. You will need to reboot your WIDI device to see the changes.
Step 3: Repeat above steps to set all WIDIs that you want to add in a group.
Step 4: After you set all WIDI devices in peripheral role, please switch them on.
Step 5: Click "Groups" menu and click "Add a new group".
Step 6: Enter your name for the group.
Step 7: Drag & drop your WIDI devices to the central and peripheral places.
Step 8: Click "Download group", the group setting will be saved in all WIDI devices. Next, all units will be rebooted automatically.
Step 9: Wait for few seconds, all WIDI devices that you set as the group will connect to each other.
Step 10: All settings will be remembered even when you switch your WIDI devices off. Next time when you switch them on again, they will connect to each other in the same group.|
* Note: If you want to forget the group connection setting, please go to each WIDI Status page and click "Reset default connections".
Check out our product information and latest updates on cme-pro.com
