Uploaded March 2023 | Updated September 2026, 11 hours ago

---

Need to replace your grip or worn out adaptors? Want to shorten your staff? This video shows how to remove/replace tube adaptors so you can do just that. You’ll need:
#1 Phillips screwdriver, handheld or electric

INSTRUCTIONS:
0:25 Use #1 Phillips screwdriver to remove screws
1:42 Twist and pull to remove the adaptor. Now you may cut down your staff or replace grip :)
3:07 Fit adaptor back on the shaft
3:12 Alignment options
3:43 Pound staff adaptor-side down into the ground
4:10 Drill in screws
5:32 Reinstall tube onto adaptor


If you need to replace the grip on your staff, here’s how:
youtu.be/aHJXrI8DP6Q

===========================================
- Access the full flowtoys range of LED & day props at: flowtoys.com/props
- Learn more about flowtoys, our mission & design values: flowtoys.com/about-us
- Discover the stories behind the toys: flowtoys.com/toystories
- Enjoy reading the history of our small company: flowtoys.com/history


find more inspiration, tips and awesome stuff at flowtoys.com