Uploaded August 2025 | Updated November 2026, 3 hours ago
In this video, we’ll walk you through how to replace the DC board.
You’ll need to open the board room to access the DC board if the machine is failing to boot up.
*Important: Do not open the board room or attempt to access the DC board without our guidance. The AC board next to it carries high voltage. There are many possible causes for a boot-up failure, and replacing the DC board is not a guaranteed solution. If you're experiencing this issue, please reach out to us via tech support for troubleshooting assistance.
decentespresso.com/support/read_emails
This video is part of a series that we produce, helping people self-repair their Decent Espresso Machine.
※ Only do this repair in consultation with Decent tech support
※ Doing otherwise might break your machine or void your warranty.
00:03 Tools Needed
00:10 Power Disconnection
00:31 Remove External Components
01:12 Remove the Main Cover
01:35 Remove the Chassis
02:55 Remove the Back Panel
03:50 Disconnect Cables from AC board
04:39 Remove AC Board and DC board
09:07 Install New DC board
12:24 Reinstall the AC Board
13:03 Reassemble the Machine
In this video, we’ll walk you through how to replace the DC board.
You’ll need to open the board room to access the DC board if the machine is failing to boot up.
*Important: Do not open the board room or attempt to access the DC board without our guidance. The AC board next to it carries high voltage. There are many possible causes for a boot-up failure, and replacing the DC board is not a guaranteed solution. If you're experiencing this issue, please reach out to us via tech support for troubleshooting assistance.
decentespresso.com/support/read_emails
This video is part of a series that we produce, helping people self-repair their Decent Espresso Machine.
※ Only do this repair in consultation with Decent tech support
※ Doing otherwise might break your machine or void your warranty.
00:03 Tools Needed
00:10 Power Disconnection
00:31 Remove External Components
01:12 Remove the Main Cover
01:35 Remove the Chassis
02:55 Remove the Back Panel
03:50 Disconnect Cables from AC board
04:39 Remove AC Board and DC board
09:07 Install New DC board
12:24 Reinstall the AC Board
13:03 Reassemble the Machine






