Uploaded February 2021 | Updated November 2026, 2 hours ago
This video shows how to replace the skid shoes on your snowblower. Skid shoes raise the shave plate about a quarter inch to keep the plate from scraping against the ground and wearing out quickly. We recommend replacing both shoes at the same time, to ensure they're the same thickness.
1. Remove the key from the snowblower.
2. Lay down a sheet of cardboard or flattened shipping box that’s almost as wide as the shave plate and is about a quarter-inch thick.
3. Place the cardboard so that it’s under the shave plate but not under the skid shoes. The cardboard raises the shave plate to prevent wear on the plate.
4. Remove the skid shoe mounting nuts and washers. Pull off the skid shoes.
5. Install the new skid shoes with the shoes flat on the ground.
6. Skid shoes can wear down over time, so keep the cardboard handy and check skid shoe position often. Adjust skid shoes when needed to keep from wearing out the shave plate.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
¬¬¬
Find parts for your snowblower at:
searspartsdirect.com/partsdirect/product-types/Snow-removal-equipment-Parts?sid=soc:youtube:snowblower
This video shows how to replace the skid shoes on your snowblower. Skid shoes raise the shave plate about a quarter inch to keep the plate from scraping against the ground and wearing out quickly. We recommend replacing both shoes at the same time, to ensure they're the same thickness.
1. Remove the key from the snowblower.
2. Lay down a sheet of cardboard or flattened shipping box that’s almost as wide as the shave plate and is about a quarter-inch thick.
3. Place the cardboard so that it’s under the shave plate but not under the skid shoes. The cardboard raises the shave plate to prevent wear on the plate.
4. Remove the skid shoe mounting nuts and washers. Pull off the skid shoes.
5. Install the new skid shoes with the shoes flat on the ground.
6. Skid shoes can wear down over time, so keep the cardboard handy and check skid shoe position often. Adjust skid shoes when needed to keep from wearing out the shave plate.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
¬¬¬
Find parts for your snowblower at:
searspartsdirect.com/partsdirect/product-types/Snow-removal-equipment-Parts?sid=soc:youtube:snowblower










