Uploaded November 2026 | Updated November 2026, 15 hours ago
Shop for New Auto Parts at 1AAuto.com trq.video/c-19-nM
This video shows you how to install new low beam bulbs from TRQ on your 2013-2020 Ford Fusion.
Estimated installation time for a professional technician is approximately: 18 minutes
This repair was done on a 2015 Ford Fusion S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Ford Fusion
2014 Ford Fusion
2015 Ford Fusion
2016 Ford Fusion
2017 Ford Fusion
2018 Ford Fusion
2019 Ford Fusion
2020 Ford Fusion
Tools you will need:
• 10mm Socket
• Trim Tool Set trq.video/obPD-1AXXX00006
• T25 Torx Bit
• Gloves trq.video/oeTA-1AXSS00048
• Safety Glasses
Subscribe: youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: trq.video/appdownloadyt
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Note: As an Amazon Associate we earn from qualifying purchases.
Shop for New Auto Parts at 1AAuto.com trq.video/c-19-nM
This video shows you how to install new low beam bulbs from TRQ on your 2013-2020 Ford Fusion.
Estimated installation time for a professional technician is approximately: 18 minutes
This repair was done on a 2015 Ford Fusion S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Ford Fusion
2014 Ford Fusion
2015 Ford Fusion
2016 Ford Fusion
2017 Ford Fusion
2018 Ford Fusion
2019 Ford Fusion
2020 Ford Fusion
Tools you will need:
• 10mm Socket
• Trim Tool Set trq.video/obPD-1AXXX00006
• T25 Torx Bit
• Gloves trq.video/oeTA-1AXSS00048
• Safety Glasses
Subscribe: youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: trq.video/appdownloadyt
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Note: As an Amazon Associate we earn from qualifying purchases.










