Uploaded August 2026 | Updated September 2026, 2 weeks ago
Shop for New Auto Parts at 1AAuto.com trq.video/c-126-i
This video shows how to replace a clutch master cylinder on your 2007-2017 Jeep Wrangler.
Estimated installation time for a professional technician is approximately: 54 minutes
This repair was done on a 2015 Jeep Wrangler Sport 3.6L 4WD Manual and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• Flat Blade Screwdriver
• 10mm Socket
• Ramps
• Trim Tool Set trq.video/obFL-1AXXX00006
• Adjustable Wrench
• Hose Pinch-Off Pliers
• Hose Pliers
• Needle nose pliers
• Needle nose pliers
• Brake Fluid
• Pick trq.video/oaHF-1AXAA00037
• Gloves trq.video/oetT-1AXSS00048
• Safety Glasses
Subscribe: youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: trq.video/appdownloadyt
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Note: As an Amazon Associate we earn from qualifying purchases.
Shop for New Auto Parts at 1AAuto.com trq.video/c-126-i
This video shows how to replace a clutch master cylinder on your 2007-2017 Jeep Wrangler.
Estimated installation time for a professional technician is approximately: 54 minutes
This repair was done on a 2015 Jeep Wrangler Sport 3.6L 4WD Manual and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• Flat Blade Screwdriver
• 10mm Socket
• Ramps
• Trim Tool Set trq.video/obFL-1AXXX00006
• Adjustable Wrench
• Hose Pinch-Off Pliers
• Hose Pliers
• Needle nose pliers
• Needle nose pliers
• Brake Fluid
• Pick trq.video/oaHF-1AXAA00037
• Gloves trq.video/oetT-1AXSS00048
• Safety Glasses
Subscribe: youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: trq.video/appdownloadyt
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Note: As an Amazon Associate we earn from qualifying purchases.
