Uploaded November 2020 | Updated November 2026, 1 day ago
In this video, we’ll show you how to replace a refrigerator door gasket that presses into a groove around the edge of the door on a French door refrigerator. The door gasket seals the gap around the door to keep the cold air in. You might need to replace it if you notice excessive frost buildup and reduced cooling or if the gasket is worn, cracked or torn.
This repair procedure works for replacing the refrigerator door and freezer door gasket in many Kenmore, Frigidaire, LG and Samsung refrigerators.
To smooth creases and folds in the gasket carefully warm it with a hair dryer or heat gun on a low setting. Be careful not to melt the gasket. You can also soak it in warm water.
Replace the gasket:
1. First unplug the refrigerator or shut off the circuit breaker for the refrigerator.
2. Pull the gasket out of the track, starting at one of the corners.
3. If the flipper mullion on your door blocks the gasket, remove the flipper mullion.
4. Using a wet cloth, wipe any spills from inside and around the track to ensure that the new gasket fits easily in the track and seals the door properly.
5. Starting at the top of the door, work the new door gasket into the track. Work your way down both sides of the door and across the bottom.
6. Check for loose spots and adjust the gasket as needed for a proper fit.
7. Spread a thin coat of petroleum jelly along the sealing surface of the door gasket to help the new gasket seal properly.
8. Reinstall the flipper mullion if you pulled it off to remove the gasket.
9. Close the door and check the fit.
10. Restore power to the refrigerator.
11. Use the same procedure to replace the freezer door gasket
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your refrigerator at
searspartsdirect.com/category/1234589/refrigerator-parts?sid=soc:youtube:refrigerator-parts
In this video, we’ll show you how to replace a refrigerator door gasket that presses into a groove around the edge of the door on a French door refrigerator. The door gasket seals the gap around the door to keep the cold air in. You might need to replace it if you notice excessive frost buildup and reduced cooling or if the gasket is worn, cracked or torn.
This repair procedure works for replacing the refrigerator door and freezer door gasket in many Kenmore, Frigidaire, LG and Samsung refrigerators.
To smooth creases and folds in the gasket carefully warm it with a hair dryer or heat gun on a low setting. Be careful not to melt the gasket. You can also soak it in warm water.
Replace the gasket:
1. First unplug the refrigerator or shut off the circuit breaker for the refrigerator.
2. Pull the gasket out of the track, starting at one of the corners.
3. If the flipper mullion on your door blocks the gasket, remove the flipper mullion.
4. Using a wet cloth, wipe any spills from inside and around the track to ensure that the new gasket fits easily in the track and seals the door properly.
5. Starting at the top of the door, work the new door gasket into the track. Work your way down both sides of the door and across the bottom.
6. Check for loose spots and adjust the gasket as needed for a proper fit.
7. Spread a thin coat of petroleum jelly along the sealing surface of the door gasket to help the new gasket seal properly.
8. Reinstall the flipper mullion if you pulled it off to remove the gasket.
9. Close the door and check the fit.
10. Restore power to the refrigerator.
11. Use the same procedure to replace the freezer door gasket
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your refrigerator at
searspartsdirect.com/category/1234589/refrigerator-parts?sid=soc:youtube:refrigerator-parts










