Magnasonic | How to Remove Tarnish After You've Used Your Ultrasonic Jewelry Cleaner @Magnasonic | Uploaded April 2024 | Updated October 2024, 9 minutes ago.
#ultrasoniccleaner #jewelrycleaner
In this video you will learn how to remove tarnish from your silver jewelry after you've cleaned it with your Magnasonic Ultrasonic Cleaner.
Learn more about the Magnasonic Ultrasonic Cleaner:
magnasonic.com/digital-ultrasonic-jewelry-cleaner
Instagram:
instagram.com/magnasonicsince1954/?igsh=MTV5NGJ6cGh1MjFxbw%3D
Facebook:
facebook.com/Magnasonic/?fref=ts&ref=br_tf
Twitter / X:
twitter.com/magnasonic
Chapters
0:00 - Intro
0:34 - What you'll need
0:41 - Cleaning your jewelry
0:55 - Removing the tarnish
1:11 - Buffing your Silver
Transcript:
How to remove Tarnish After you've used your magnesite ultrasonic jewelry cleaner to clean your silver.
Have you ever found that after a while, your jewelry or flatware has lost its shine or look downright dirty?
Chances are you're looking at tarnish.
What is tarnish?
Tarnish is much like rust in the sense that it's caused by oxidation or exposure to air over time.
The good news is, with an ultrasonic cleaner and a little bit of elbow grease, your silver will shine in no time.
Here's what you'll need the ultrasonic cleaner, some dish soap, warm water, a microfiber cloth to start.
Use the ultrasonic cleaner to remove dirt and grime. Mix a small amount of dish soap with warm water in a separate bowl. Dip the microfiber cloth into the soapy water.
Rub the silver with a wet cloth to remove the tarnish. Rinse the silver item in cold water. Dry the item with a soft cloth. After removing the tarnish, the last step is to buff the silver with another dry cloth to restore its shine.
And you're done.
Now you can marvel at that brilliant silver shine.
#ultrasoniccleaner #jewelrycleaner
In this video you will learn how to remove tarnish from your silver jewelry after you've cleaned it with your Magnasonic Ultrasonic Cleaner.
Learn more about the Magnasonic Ultrasonic Cleaner:
magnasonic.com/digital-ultrasonic-jewelry-cleaner
Instagram:
instagram.com/magnasonicsince1954/?igsh=MTV5NGJ6cGh1MjFxbw%3D
Facebook:
facebook.com/Magnasonic/?fref=ts&ref=br_tf
Twitter / X:
twitter.com/magnasonic
Chapters
0:00 - Intro
0:34 - What you'll need
0:41 - Cleaning your jewelry
0:55 - Removing the tarnish
1:11 - Buffing your Silver
Transcript:
How to remove Tarnish After you've used your magnesite ultrasonic jewelry cleaner to clean your silver.
Have you ever found that after a while, your jewelry or flatware has lost its shine or look downright dirty?
Chances are you're looking at tarnish.
What is tarnish?
Tarnish is much like rust in the sense that it's caused by oxidation or exposure to air over time.
The good news is, with an ultrasonic cleaner and a little bit of elbow grease, your silver will shine in no time.
Here's what you'll need the ultrasonic cleaner, some dish soap, warm water, a microfiber cloth to start.
Use the ultrasonic cleaner to remove dirt and grime. Mix a small amount of dish soap with warm water in a separate bowl. Dip the microfiber cloth into the soapy water.
Rub the silver with a wet cloth to remove the tarnish. Rinse the silver item in cold water. Dry the item with a soft cloth. After removing the tarnish, the last step is to buff the silver with another dry cloth to restore its shine.
And you're done.
Now you can marvel at that brilliant silver shine.