Uploaded August 2022 | Updated November 2026, 4 days ago
In this video I show you how to teardown a Google Pixel phone in case you need to replace the screen, work on the motherboard, or replace the battery. This is the first generation Pixel. Yes the phone is old, but I am practicing tearing down phones.
If you plan on reusing the screen, use a q-tip with alcohol to remove the adhesive from the phone frame and the back of the screen glass.
The hardest part of putting everything back together was getting the mid frame to snap in on all sides. I realized the black antenna that goes along the side of the battery, on the power+vol button side, wasn't tucked in. You need to tuck that black antenna wire under the battery or else the mid frame will not seat down all the way.
The product links below are affiliate links. As an Amazon Associate I earn from qualifying purchases. I may receive a commission if you make a purchase after clicking on one of these links.
PRODUCT LINKS:
Wagner Heat Gun
amzn.to/3MfY9D4
Razor Blades
amzn.to/3McExQ9
42PCS Guitar Picks with All Thickness
amzn.to/3sA7dLd
amzn.to/3yK3z4M
Magnetic Screwdriver Kit - 56 bits
amzn.to/3KWmyyg
Magnetic Screwdriver Kit - 42 bits
amzn.to/3AgsMUQ
Magnetic Screwdriver Kit - 42 bits
amzn.to/3meC6Bj
Electronics Opening Pry Tool Repair Kit
amzn.to/3SPBykn
MMOBIEL 1 mm Double Sided TAPE
amzn.to/3wq6Mo2
MMOBIEL T-7000 Multipurpose Glue
amzn.to/3wc8cUc
Visit my Amazon storefront to view products that I have reviewed. As an Amazon Influencer I earn a small commission on eligible products.
amazon.com/shop/miggyelite
In this video I show you how to teardown a Google Pixel phone in case you need to replace the screen, work on the motherboard, or replace the battery. This is the first generation Pixel. Yes the phone is old, but I am practicing tearing down phones.
If you plan on reusing the screen, use a q-tip with alcohol to remove the adhesive from the phone frame and the back of the screen glass.
The hardest part of putting everything back together was getting the mid frame to snap in on all sides. I realized the black antenna that goes along the side of the battery, on the power+vol button side, wasn't tucked in. You need to tuck that black antenna wire under the battery or else the mid frame will not seat down all the way.
The product links below are affiliate links. As an Amazon Associate I earn from qualifying purchases. I may receive a commission if you make a purchase after clicking on one of these links.
PRODUCT LINKS:
Wagner Heat Gun
amzn.to/3MfY9D4
Razor Blades
amzn.to/3McExQ9
42PCS Guitar Picks with All Thickness
amzn.to/3sA7dLd
amzn.to/3yK3z4M
Magnetic Screwdriver Kit - 56 bits
amzn.to/3KWmyyg
Magnetic Screwdriver Kit - 42 bits
amzn.to/3AgsMUQ
Magnetic Screwdriver Kit - 42 bits
amzn.to/3meC6Bj
Electronics Opening Pry Tool Repair Kit
amzn.to/3SPBykn
MMOBIEL 1 mm Double Sided TAPE
amzn.to/3wq6Mo2
MMOBIEL T-7000 Multipurpose Glue
amzn.to/3wc8cUc
Visit my Amazon storefront to view products that I have reviewed. As an Amazon Influencer I earn a small commission on eligible products.
amazon.com/shop/miggyelite










