How To Remove and Replace the Starter on a 2011-2015 Chevy Cruze @oreillyautoparts
How To Remove and Replace the Starter on a 2011-2015 Chevy Cruze  @oreillyautoparts
Uploaded December 2025 | Updated November 2026, 3 days ago
This DIY video gives you step-by-step instructions that show you how to Remove and Replace the Starter on a 2011, 2012, 2013, 2014, or 2015 Chevy Cruze.

Supplies Needed for This Job:
1. Safety Glasses: orly.cc/4e7cFKz
2. Gloves: orly.cc/3YKu3QZ
3. Ultima Select Starter: orly.cc/4q6BoFS
4. Breaker Bar: orly.cc/3Amrew0
5. Wheel Chock: orly.cc/4f7bdZX
6. Jack: orly.cc/3BjVHeB
7. Jack Stand: orly.cc/48rS2aE
8. Ratchet and Socket Set: orly.cc/3Odkxji
9. Torque Wrench: orly.cc/3Dcgu4g
10. Swivel Ratchet: orly.cc/4aw0sky
11. Trim Tool: orly.cc/48tSvZX

0:00 Welcome Back
0:40 Lift and Support Vehicle
0:50 Disconnect Negative Battery Cable
1:00 Remove Splash Guard (If Necessary)
1:10 Remove Old Starter
2:30 Install New Starter
4:00 Reinstall Splash Guard (If Neccessary)
4:10 Reconnect Negative Battery Cable
4:20 Lower Vehicle

Facebook: facebook.com/oreillyautoparts
Instagram: instagram.com/oreillyautoparts
Twitter: twitter.com/oreillyauto

Find your local O’Reilly Auto Parts: oreillyauto.com/locations

Shop all your automotive needs: oreillyauto.com

Subscribe and ring the notification bell! bit.ly/2bTyluF

Check out our How-To Hub library: oreillyauto.com/how-to-hub

On our channel we cover several different topics:
Auto Product Descriptions
DIY Auto Repair
Do It Yourself Car Maintenance
Car Repair How-Tos by Year, Make and Model

O’Reilly Auto Parts is a retailer that provides automotive aftermarket parts, tools, supplies, equipment and accessories in the United States and Mexico for both professionals and do-it-yourself customers. We’ve grown from a single store in 1957 to our current size of well over 6,000 locations (and growing), and our channel offers reliable automotive information that is concise and easy to understand.

#OReillyPowered #CarRepair
#TeamOReilly #CarMaintenance

O’Reilly Auto Parts, headquartered in Springfield, Missouri, has been a household name for aftermarket replacement parts, repair tools, interior accessories, and even professional-grade shop equipment since its founding in 1957. Since then we’ve only grown, and now have over 6,000 stores throughout the United States and Mexico–all dedicated to servicing the do-it-yourself and professional customer. The O’Reilly Auto Parts YouTube channel provides another way for us to serve our customers by offering reliable automotive repair and product selection information in a way that is easy to understand, no matter the user’s skill level. Let us help you repair your car with helpful tips and step-by-step instructions to get the job done right.

Park on a level surface… and open the hood.
Chock the rear wheels… then use a jack and jack stands to lift and support the front end.
Use a 10mm socket and ratchet to loosen and disconnect the negative battery cable.
Under the vehicle, you may have a splash guard to remove. Use a trim tool or flathead screwdriver to remove the clips… and an 8mm socket and ratchet to remove the other fasteners.
Locate the starter, which will be toward the back of the engine bay under the intake manifold.
First use your 13mm deep socket and extension to loosen and remove the nut securing the starter and alternator positive cable.
Once that nut is removed, take the cable off the stud.
Next use a 10mm deep socket and extension to loosen and remove the nut from the starter positive cable… and detach that cable.
Now use your 13mm deep socket and extension to loosen and remove the nut securing the starter ground cable.
Once that nut is removed, take the cable off the stud… then use the same socket to remove the stud.
At this point, there’s only one 13mm bolt left holding the starter in place. It’s on the top side of the starter, which will be impossible to see.
If you want a little more room to work, you can remove the intake manifold brace, but either way, you’ll need an extension to reach the bolt.
Once you’ve got your socket on the bolt and you’ve managed to loosen it, secure the starter with one hand and carefully remove the bolt the rest of the way with your fingers.
With the bolt removed, the starter should be free.
Lower it carefully out of the vehicle… then compare it to your new starter to make sure you have the right replacement part.
Once you’re ready to install your new starter, take note of where the top bolt hole is—since you won’t be able to see it with the starter in position—and move your new starter into place.
Since the bottom bolt hole is easier to get to, start by threading the bottom stud into place.
For the top bolt, use your left hand to guide it… and your right hand to thread it using an extension or telescoping magnet.
Just make sure the bolt is turning freely and not cross-threading as you start it into the engine.
How To Remove and Replace the Starter on a 2011-2015 Chevy CruzeHow To Remove and Replace the Rear Brakes on a 2011-2015 Chevy CruzeHow To: Change the Turn Signal Bulb on a 2011 to 2018 Ford FocusHow To: Install a Trailer Hitch in a 2014 to 2019 Toyota HighlanderRock Instrumental Jingle (2022) - OReilly Auto PartsHow To: Use a Fuel Pressure Test KitHow To: Reset the Radio and Clock in a 2003 to 2007 Honda AccordAztec V6 Power vs. All the Little Vibes @StayTunedTAHow To Replace a Fuel Pump or AssemblyDIY – How to Replace the Starter on a 2008-2013 Chevy SilveradoIs @RidingWithAlexTaylor  the ONLY ONE playing it SMART at the Vibe 200?!What Does DTC P0442 Mean? Evaporative Emission System Leak Detected (Small Leak)
OReilly Auto Parts |

How To Remove and Replace the Starter on a 2011-2015 Chevy Cruze

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER