Uploaded January 2025 | Updated November 2026, 4 days ago
Struggling with a snapped screw buried deep in wood that seems utterly impossible to remove? You've drilled, you've twisted, but that stubborn 4-inch beast just won't budge—especially when it's tangled in a knotty piece of timber. In this game-changing DIY tutorial from Ultimate Handyman, I show you how to build your own custom 6-inch hole saw from everyday materials and extract it like a pro in under 10 minutes of actual work! What You'll Learn in This Video: DIY Tool Hack: Craft a super-effective long hole saw using an 8mm stainless steel tube, a square file for teeth, and a diamond needle file to clear the center—cheaper and more precise than buying a fancy one!
Pro Extraction Technique: Secure it with super glue and activator (shoutout to Mitre Fast for that instant bond), chuck it into your drill, and cut around the broken screw at low speed. Pro tip: Clear sawdust often to avoid overheating (yes, it might smoke a bit, but that's normal!).
Real Challenges Covered: Dealing with wood knots, friction smoke, and why short commercial hole saws fail on long screws.
Finish Like a Boss: Once out, patch the hole with a dowel and glue for a seamless repair—ready for a new screw.
This method builds on my previous videos for easier fixes: Remove a broken screw using a diamond-coated hole saw: youtube.com/watch?v=EKra3nCw8Nc
How to remove a stripped screw: youtu.be/_mTFQbaT3Zc
If you're a woodworker, DIYer, or just hate stuck hardware, this is your ultimate lifesaver. Drop a if you've battled a snapped screw before, and comment below: What's the toughest fastener fail you've faced? Subscribe for more no-BS handyman hacks that save time, money, and sanity!
#SnappedScrew #RemoveBrokenScrew #DIYTutorial #WoodworkingHacks #HoleSawDIY #HandymanTips #ScrewExtraction #UltimateHandyman
00:00 The Impossible Screw Problem
01:13 Making the hole saw
04:05 Removing the broken screw
Struggling with a snapped screw buried deep in wood that seems utterly impossible to remove? You've drilled, you've twisted, but that stubborn 4-inch beast just won't budge—especially when it's tangled in a knotty piece of timber. In this game-changing DIY tutorial from Ultimate Handyman, I show you how to build your own custom 6-inch hole saw from everyday materials and extract it like a pro in under 10 minutes of actual work! What You'll Learn in This Video: DIY Tool Hack: Craft a super-effective long hole saw using an 8mm stainless steel tube, a square file for teeth, and a diamond needle file to clear the center—cheaper and more precise than buying a fancy one!
Pro Extraction Technique: Secure it with super glue and activator (shoutout to Mitre Fast for that instant bond), chuck it into your drill, and cut around the broken screw at low speed. Pro tip: Clear sawdust often to avoid overheating (yes, it might smoke a bit, but that's normal!).
Real Challenges Covered: Dealing with wood knots, friction smoke, and why short commercial hole saws fail on long screws.
Finish Like a Boss: Once out, patch the hole with a dowel and glue for a seamless repair—ready for a new screw.
This method builds on my previous videos for easier fixes: Remove a broken screw using a diamond-coated hole saw: youtube.com/watch?v=EKra3nCw8Nc
How to remove a stripped screw: youtu.be/_mTFQbaT3Zc
If you're a woodworker, DIYer, or just hate stuck hardware, this is your ultimate lifesaver. Drop a if you've battled a snapped screw before, and comment below: What's the toughest fastener fail you've faced? Subscribe for more no-BS handyman hacks that save time, money, and sanity!
#SnappedScrew #RemoveBrokenScrew #DIYTutorial #WoodworkingHacks #HoleSawDIY #HandymanTips #ScrewExtraction #UltimateHandyman
00:00 The Impossible Screw Problem
01:13 Making the hole saw
04:05 Removing the broken screw










