Uploaded July 2023 | Updated September 2026, 2 weeks ago
In this video I will be showing you how to properly remove all of the parts in a car to be able to get to the clutch. This can be a big expensive job so why not try to do it yourself and save money/become a gearhead!
Jump to spots in the video:
00:24 What is a rear main seal?
00:51 Why should you change the rear main seal?
01:35 How to replace the rear main seal
06:07 How to install a new throw out bearing
09:15 Test fit your clutch plate on input shaft
09:40 Installing the machined flywheel
11:50 Cleaning and installing the clutchplate/pressure plate
14:06 Installing the transmission and the lower transmission to engine bolts
15:45 Installing the rear engine mount
16:20 Installing the cv axles
16:43 Installing the lower ball joint
16:33 Installing the cv axle nuts
17:56 Install the wheels
18:30 Installing the new transmission fluid
19:53 Installing the under engine cover
20:08 Installing the last transmission to engine bolts
20:28 Connect the 2 electrical connection at the back
20:37 Install the transmission cable bracket, wire loom, cables/clips
22:20 Install the starter motor, the main positive cable, and the solenoid trigger wire
23:02 Install the clutch slave cylinder and brackets plus ground cable
23:50 Install the driver's side transmission/engine mount
25:00 Remove the engine cradle and install the engine cover
25:25 Install the air box and ducting/purge solenoid/MAF sensor
27:41 Install the battery carrier and battery
29:38 Check the pedal height and test drive
This is another episode of a new series on how to become a GEARHEAD! If you have ever wondered how people know so much about cars and are absolutely crazy about anything with a motor, then this is a great series for you. This is geared towards people that have no knowledge of cars but want to learn; however, the content in my videos does try to make solid connections between theory and practical applications so even seasoned gearheads will find the info useful. Tired of paying other people money to fix your car? Then ya gotta learn this stuff!
If you have any questions about the video, please feel free to comment and I will get back to you as soon as possible. Time me....
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Canon M50 camera amzn.to/3x53c3v
Rode Wireless Go 2 amzn.to/46eIzl2
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at instagram.com/way_of_the_wrench
If you enjoyed the video and/or learned some cool tech tips, I would appreciate a share out on your social media so I can be inspired to create more videos and continue to make better content for you guys! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Very special thanks to Guillermo Vargas for all of his work on the new "How to Become a Gearhead" intro. Super stand up guy who offered up his services and came through big time once again. Thanks bruh! It looks amazing. If you are looking for some custom advertising or graphic design of your own, hit him up on his Instagram Guillermo Zevallos Vargas or his website vargasportfolio.com
Music for this very special episode by :
Music To Wear Fingerless Gloves To by Punch Deck
punchdeck.bandcamp.com
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
INTRNLCMD – Seasons:
youtube.com/watch?v=PTB0V8nyRtk
INTRNLCMD – Coastline:
youtube.com/watch?v=fZI1uNmhXi8
Song: LAKEY INSPIRED - Chill Day (Vlog No Copyright Music)
youtube.com/watch?v=vtHGESuQ22s
Thanks to Teknoaxe for his royality free music for our outro music. Please check out all of Teknoaxe's sweet music tracks!
teknoaxe.com
Outro music is Sythwave E
https://www.youtube.com/watch?v=RBxnY...
My Line - Synthwave - Royalty Free Music
youtube.com/watch?v=oPBtR1raZdE
Way of the Wrench is looking for a collaboration with any Youtubers out there hard at work making royalty free music, just send me a message with your link for consideration. If you have a tool/product that you would like us to review or use in our videos, send me a message to discuss details.
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.
In this video I will be showing you how to properly remove all of the parts in a car to be able to get to the clutch. This can be a big expensive job so why not try to do it yourself and save money/become a gearhead!
Jump to spots in the video:
00:24 What is a rear main seal?
00:51 Why should you change the rear main seal?
01:35 How to replace the rear main seal
06:07 How to install a new throw out bearing
09:15 Test fit your clutch plate on input shaft
09:40 Installing the machined flywheel
11:50 Cleaning and installing the clutchplate/pressure plate
14:06 Installing the transmission and the lower transmission to engine bolts
15:45 Installing the rear engine mount
16:20 Installing the cv axles
16:43 Installing the lower ball joint
16:33 Installing the cv axle nuts
17:56 Install the wheels
18:30 Installing the new transmission fluid
19:53 Installing the under engine cover
20:08 Installing the last transmission to engine bolts
20:28 Connect the 2 electrical connection at the back
20:37 Install the transmission cable bracket, wire loom, cables/clips
22:20 Install the starter motor, the main positive cable, and the solenoid trigger wire
23:02 Install the clutch slave cylinder and brackets plus ground cable
23:50 Install the driver's side transmission/engine mount
25:00 Remove the engine cradle and install the engine cover
25:25 Install the air box and ducting/purge solenoid/MAF sensor
27:41 Install the battery carrier and battery
29:38 Check the pedal height and test drive
This is another episode of a new series on how to become a GEARHEAD! If you have ever wondered how people know so much about cars and are absolutely crazy about anything with a motor, then this is a great series for you. This is geared towards people that have no knowledge of cars but want to learn; however, the content in my videos does try to make solid connections between theory and practical applications so even seasoned gearheads will find the info useful. Tired of paying other people money to fix your car? Then ya gotta learn this stuff!
If you have any questions about the video, please feel free to comment and I will get back to you as soon as possible. Time me....
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Canon M50 camera amzn.to/3x53c3v
Rode Wireless Go 2 amzn.to/46eIzl2
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at instagram.com/way_of_the_wrench
If you enjoyed the video and/or learned some cool tech tips, I would appreciate a share out on your social media so I can be inspired to create more videos and continue to make better content for you guys! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Very special thanks to Guillermo Vargas for all of his work on the new "How to Become a Gearhead" intro. Super stand up guy who offered up his services and came through big time once again. Thanks bruh! It looks amazing. If you are looking for some custom advertising or graphic design of your own, hit him up on his Instagram Guillermo Zevallos Vargas or his website vargasportfolio.com
Music for this very special episode by :
Music To Wear Fingerless Gloves To by Punch Deck
punchdeck.bandcamp.com
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
INTRNLCMD – Seasons:
youtube.com/watch?v=PTB0V8nyRtk
INTRNLCMD – Coastline:
youtube.com/watch?v=fZI1uNmhXi8
Song: LAKEY INSPIRED - Chill Day (Vlog No Copyright Music)
youtube.com/watch?v=vtHGESuQ22s
Thanks to Teknoaxe for his royality free music for our outro music. Please check out all of Teknoaxe's sweet music tracks!
teknoaxe.com
Outro music is Sythwave E
https://www.youtube.com/watch?v=RBxnY...
My Line - Synthwave - Royalty Free Music
youtube.com/watch?v=oPBtR1raZdE
Way of the Wrench is looking for a collaboration with any Youtubers out there hard at work making royalty free music, just send me a message with your link for consideration. If you have a tool/product that you would like us to review or use in our videos, send me a message to discuss details.
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.
